Fema  I4F isolated signal converter for frequency, impulses, RPM speed and flow signals

Fema I4F isolated signal converter for frequency, impulses, RPM speed and flow signals

SKU: FMB-007

Fema I4F is an Isolated signal converter for frequency, impulses, RPM speed, and flow signals. Output signal in 4/20mA and 0/10Vdc. Isolated 3 ways.
Configurable to work with NPN, PNP, Pick-up, Namur, mechanical contact, reed contact, and other sensors. Dedicated input to measure frequency from AC voltage up to 600 Vac.
Accepts a wide range of frequency ranges, from 1 Hertz up to 1 MHertz, with a minimum workable signal of 100 milliHertz and resolution of 1 milliHertz. 
 

We have a service to configure the I4F for you if you require it.

Fema
Buy more for less:
1-4items$126.51/ each 
5-9items$113.86/ eachsave10%
10or more items$107.53/ eachsave15%
  • $126.51
Qty:  
In stock(9 items available)

Isolated signal converter for frequency, impulses, RPM speed, and flow signals. Output signal in 4/20mA and 0/10Vdc. Isolated 3 ways.

Configurable to work with NPN, PNP, pickup, Namur, mechanical contact, reed contact, and other sensors.

Dedicated input to measure frequency from AC voltage up to 600 Vac.

Accepts a wide range of frequency ranges, from 1 Hertz up to 1 MHertz, with a minimum workable signal of 100 milliHertz and resolution of 1 milliHertz.

Output signal configurable for 4/20 mA (active and passive) and 0/10 Vdc. Universal power supply from 18 to 265 Vac/dc. 3-way isolation between input, output, and power circuits.

Customizable input and output signal ranges. Configuration through front push-button keypad and front display. Configurable information messages (tare value, mV at terminals, input signal value, output signal value, configured label, signal percentage, process value, excitation voltage value, and excitation current value). Manual "force" functions to generate low and high output signals, to validate remote instrumentation during installation. "Tare" function. "Password" function to block unauthorized access to the configuration menu. "SOS" mode to help with critical maintenance and repairs without affecting the manufacturing process.

Designed for industrial use, with potential integration into a wide range of applications. Optional customization.

    • SKU
      FMB-007
    • Weight
      0.15 kg
    • Dimensions (L x W x H)
      12 x 12 x 3 cm

POWER SUPPLY:

  • Voltage range 18 to 265 Vac/dc isolated (20 to 240 Vac/dc ±10%) 
  • AC frequency 45 to 65 Hz 
  • Consumption <3.5 W 
  • Power wires 1 mm2 to 2.5 mm2 (AWG17 to AWG14) 
  • Overvoltage category

ISOLATION:

  • Input-output 3000 Veff (60 seconds) 
  • Power - input 3000 Veff (60 seconds) 
  • Power - output 3000 Veff (60 seconds) 

SENSORS: 

  • Types of sensor NPN, PNP, pick-up, push-pull, mechanical contact, reed contact, Vac
  • Max. voltage at terminals (see Manual Table 3)
  • Input impedance (see Manual  Table 11)
  • Maximum frequency (see Manual  Table 11)
  • Excitation voltage 15 Vdc @50 mA, 8.2 Vdc @50 mA, 5 Vdc @50 mA
  • Typical detection levels (see Manual  Table 3) 

 ACCURACY AT 25ºC: 

  • ‘Slow’ mode error f 2 x 0.5 x 10-6 Hz. 
  • ‘Fast’ mode error 1/gate (see Manual  ‘gate’ parameter at section 16.2) (typical error 2 Hz for ‘gate’ of 0.5 seconds) 
  • Quartz accuracy ±50ppm 
  • mA output accuracy 0.05 % FS Vdc
  • Output accuracy 0.10 % FS thermal drift 50 ppm/ºC
  • Min. detectable frequency 100 mHz (signals below 100 mHz are                                                                 considered 0 Hz) 
  • Resolution 1 mHz 

STEP RESPONSE: 

  • In ‘fast’ mode ‘Gate’ parameter + 50 mSec.
  • In ‘slow’ mode 1/frequency + 50 mSec. 

OUTPUT SIGNAL RANGES:

  • Active current output 4/20 mA active max. <22 mA, min.  0 mA maximum load <400 Ohm 
  • Passive current output 4/20 mA passive max. 30 Vdc on terminals
  • Voltage output 0/10 Vdc, max. <11 Vdc, min. -0.05 Vdc (typ.) minimum load > 10 KOhm 

CONFIGURATION SYSTEM:

  • Keypad + display accessible at the front of the instrument
  • Configuration ‘configuration menu’ and predefined ‘codes’ scalable units scalable input ranges 
  • Scalable output ranges scalable process display7

ENVIRONMENTAL: 

  • IP protection IP30
  • Impact protection IK06 
  • Operation temperature from 0 to +50 ºC 
  • Storage temperature from -20 to +70 ºC
  • ‘Warm-up’ time 15 minutes
  • Humidity 0 to 95% non-condensing
  • Altitude up to 2000 meters

MECHANICAL 

  • Size 106 x 108 x 22.5 mm
  • Mounting standard DIN rail (35 x 7.5 mm)
  • Connections plug-in screw terminal (pitch 5.08 mm)
  • Housing material polyamide V0
  • Weight <150 grams
  • Packaging 120 x 115 x 30 mm, cardboard

Faulty Goods and Warranty

Where such goods have been supplied we undertake to repair or replace them as quickly as possible.Prior to returning faulty items, please contact us with a description of the fault as one of our engineers might be able to assist you by resolving the issue over the phone.
A Warranty form must be filled out and returned with any goods.

Our standard warranty period is 12 months from the date of purchase unless stated otherwise.

Other warranty periods:

Labjack Products: 5 Years
Atop Products: 3 Years
MeanWell Products: 3 Years
Terracom Products: 3 Years

Warranty is subject to us being satisfied that a defect was caused by defective workmanship or materials and was not caused by or was not substantially contributed to by other factors beyond our control including incorrect installation, alterations or modifications of the product not recommended by the manufacturer.

Returns Policy

If you are dissatisfied with our goods you may return them within 14 days of the dispatch date. Contact us for an authorisation and we will refund your purchase less shipping costs and restocking fees. All returned goods MUST be in AS NEW condition including ALL PACKAGING and DOCUMENTATION / MANUALS etc.

Please note:

  • The product returned will attract a 20% restocking fee.
  • The customer must pay the delivery costs.
  • Non standard, custom made or a specially manufactured or imported products are not returnable.
  • Semiconductors, books and software are not refundable

Full Terms and Conditions

By placing an order with Ocean Controls, you agree to be bound by our Terms and Conditions of Trade.

Related products

Customers who viewed this product also bought