HD67909 Modbus TCP Slave / HART Master - Converter

HD67909 Modbus TCP Slave / HART Master - Converter

SKU: ADW-021

This product allows you to monitor HART slave devices (like Sensors, etc..) with a Modbus TCP master (like PLC, Supervisory System etc..). It also can manage up to 15 Hart devices.
 

ADF Web
  • Manufacturer: ADF Web
Buy more for less:
1-4items$424.28/ each 
5-9items$381.85/ eachsave10%
10or more items$360.63/ eachsave15%
  • $424.28
Qty:  
In stock(2 items available)

The HD67909-A1 are Modbus TCP Slave / HART Master - Converters. They allow to monitor HART slave devices (like Sensors, etc..) with a Modbus TCP master (like PLC, Supervisory System etc..). On the HART side, the HD67909-A1 can manage up to 15 devices (+1 Secondary Master). 

It allows for the following characteristics: 

  • Triple isolation between Serial - Power Supply, Ethernet - HART, HART - Power Supply
  • Two-directional information between Ethernet bus and HART bus
  • Mountable on 35mm Rail DIN
  • Wide power supply input range: 8…24V AC or 12…35V DC
  • Wide temperature range: -40°C / 85°C [-40°F / +185°F]

CONFIGURATION: You need Compositor SW67908 software on your PC in order to perform the following: 

  • Define the parameters of Modbus TCP line
  • Define the parameters of HART line
  • Define HART variables in read/write
  • Define HART rules for gateway functions
  • Update the device
    • SKU
      ADW-021
    • Weight
      0.2 kg
    • Dimensions (L x W x H)
      16 x 14 x 5.5 cm
  • Power Supply: 8 to 24 VAC or 12 to 35 VDC
  • Power Supply Connector: 2-way 5mm terminal block
  • Ports: 1 x Ethernet, 1 Hart FSK
  • Hart Protocol: supports HART FSK. HD67909-A1 can be used like Primary HART Master or like Secondary HART Master. 
  • Modbus TCP Connector: RJ45
  • HART Connector: screw terminals
  • Programming Software: SW67909
  • Operating Temperature: -40° to +85° (-40°F to +185°F)
  • Mechanical Fixing: DIN Rail montage
  • Weight: 200g approx
  • Dimensions: 107 x 120 x23 (mm)
  • Manufacture Number: HD67909-A1

Faulty Goods and Warranty

Where such goods have been supplied we undertake to repair or replace them as quickly as possible.Prior to returning faulty items, please contact us with a description of the fault as one of our engineers might be able to assist you by resolving the issue over the phone.
A Warranty form must be filled out and returned with any goods.

Our standard warranty period is 12 months from the date of purchase unless stated otherwise.

Other warranty periods:

Labjack Products: 5 Years
Atop Products: 3 Years
MeanWell Products: 3 Years
Terracom Products: 3 Years

Warranty is subject to us being satisfied that a defect was caused by defective workmanship or materials and was not caused by or was not substantially contributed to by other factors beyond our control including incorrect installation, alterations or modifications of the product not recommended by the manufacturer.

Returns Policy

If you are dissatisfied with our goods you may return them within 14 days of the dispatch date. Contact us for an authorisation and we will refund your purchase less shipping costs and restocking fees. All returned goods MUST be in AS NEW condition including ALL PACKAGING and DOCUMENTATION / MANUALS etc.

Please note:

  • The product returned will attract a 20% restocking fee.
  • The customer must pay the delivery costs.
  • Non standard, custom made or a specially manufactured or imported products are not returnable.
  • Semiconductors, books and software are not refundable

Full Terms and Conditions

By placing an order with Ocean Controls, you agree to be bound by our Terms and Conditions of Trade.

Related products

Customers who viewed this product also bought