DCS810 Brushed DC Servo Motor Drive

DCS810 Brushed DC Servo Motor Drive

SKU: SMC-242

Leadshine DCS810 brushed DC servo motor driver for 20 to 400W motors.

  • Manufacturer: Leadshine
Buy more for less:
1-4items$136.03/ each 
5-9items$122.43/ eachsave10%
10or more items$115.63/ eachsave15%
  • $136.03
In stock(2 items available)

The DCS810 is a digital DC servo driver developed with DSP and high efficient MOSFET technologies. In position control, it’s easy for the end users to change stepping drivers to the DCS810 without changing control systems, because its input command is PUL/DIR signal, which is compatible with that of stepping drivers. In low power motion control applications, performances of DC servo systems using the DCS810 are better than those of digital AC servo systems in velocity, precision, noise, stability, or at least as good as those of digital AC servo systems. However, the cost of the DCS810 stays at the price line of a stepping driver, namely far lower than those of AC servo drivers.


  • Based on DSP control technology and high smooth servo control algorithm.
  • PC based and handheld configuration tools, including Pro Tuner and STU.
  • Feedback resolution ×4 encoder line count.
  • Position Following error lock range adjustable
  • Position error can be eliminated to 1 count, and Velocity error can be eliminated to the Desired Velocity ±0.3%
  • Built-in motion controller for self-test with trapezoidal velocity profile
  • Support PUL/DIR and CW/CCW control signals
  • Opto-isolated inputs, support single-ended and differential signals
  • 10 latest errors self-record function
  • Over-current, over-voltage, under-voltage, phase error, encoder error, position following error protections
  • The DCS810 is very easy to tune and all parameters are visible.

Parameter tuning tools, including Pro Tuner (Windows based setup software), EZ Tuner (Text Monitor) and STU (Small servo tuning unit) can meet different tuning environments or requirements. The LSK-001 programming cable and Protuner Software is required to tune the drive.

    • SKU
    • Weight
      0.24 kg
    • Dimensions (L x W x H)
      13 x 9 x 4 cm

Supply voltage: 18 to 80 VDC

Peak output current: 20 A

Logic signal current: 7 to 15 mA

Pulse input frequency: 500 kHz

Isolation resistance: 500 MΩ 

Current provided to encoder: 50 mA

Electronic gear ratio: 1/255 to 255

Operating environment: 

  • Environment: Avoid dust, oil fog and corrosive gases
  • Ambient temperature: 0 to 50 °C
  • Humidity: 40 to 95% RH
  • Vibration: 5.9 m/s² Max

Storage temperature: -20 to 65 °C

Weight: Approx. 210 g

Dimension: 116 x 69 x 27 mm

Programming Cable:

The drive can be tuned with the Protuner software and an RJ-12 to DE-9 serial cable. The wiring of the cable is:

 DE-9 Pin: 
 RJ-12 Pin: 

Faulty Goods and Warranty

Where such goods have been supplied we undertake to repair or replace them as quickly as possible.Prior to returning faulty items, please contact us with a description of the fault as one of our engineers might be able to assist you by resolving the issue over the phone.
A Warranty form must be filled out and returned with any goods.

Our standard warranty period is 12 months from the date of purchase unless stated otherwise.

Other warranty periods:

Labjack Products: 5 Years
Atop Products: 3 Years
MeanWell Products: 3 Years
Terracom Products: 3 Years

Warranty is subject to us being satisfied that a defect was caused by defective workmanship or materials and was not caused by or was not substantially contributed to by other factors beyond our control including incorrect installation, alterations or modifications of the product not recommended by the manufacturer.

Returns Policy

If you are dissatisfied with our goods you may return them within 14 days of the dispatch date. Contact us for an authorisation and we will refund your purchase less shipping costs and restocking fees. All returned goods MUST be in AS NEW condition including ALL PACKAGING and DOCUMENTATION / MANUALS etc.

Please note:

  • The product returned will attract a 20% restocking fee.
  • The customer must pay the delivery costs.
  • Non standard, custom made or a specially manufactured or imported products are not returnable.
  • Semiconductors, books and software are not refundable

Full Terms and Conditions

By placing an order with Ocean Controls, you agree to be bound by our Terms and Conditions of Trade.

Related products

Customers who viewed this product also bought