iCS-2435 3.5 N·m NEMA 24 Integrated Closed Loop Stepper Motor
iCS series is integrated closed-loop stepper motor with 14-bit single-turn absolute encoder for smooth and jitter-free motor start-up. iCS-2435 from Leadshine is a 3.5 N·m NEMA 24 stepper motor with integrated driver. Standard pulse and direction (or CW/CCW) input.
iCS series is stepper motor integrated 14-bit incremental magnetic encoder and drive to solve the loss of step problems in open loop stepper control systems, thus increase system reliability at minimal cost increase. It implements advanced control algorithm of Leadshine based on its tens of years’ experience in stepper and servo controls. At very compact size and with all components integrated, the iCS can save mounting space, eliminate encoder connection & motor wiring time, reduce interference, and cut/reduce cable and labor costs. The drive of the iCS-2435 can drive the stepper motor with high precision, smooth movement, and extra low noise at low speed movement with no obvious resonance area.
Features
- NEMA24, 3.5N.m
- No loss of step
- no torque reservation
- no hunting or overshooting
- no tuning for easy setup
- Enhance performance, especially at low speed application (
- Soft-start with no jump when powered on
- Low noise and vibration, smooth motion
- Step&direction and CW&CCW control
- 3 digital inputs, 1 optically isolated digital output
- 14-bit single-turn incremental encoder
- RS232 communication for Leadshine software connection
- Over voltage, over current, position following error protections, etc.
Leadshine already loads default current-loop parameters for the iCS-2435 Those default parameter values have been optimized. They should be good enough for most industrial applications, and there is no need to tune them. However, if you want to fine tune the iCS-2435 for best performance for your applications, Leadshine also offers tuning software, ProTuner, which allows you to adjust those current-loop parameters. The serial cable for tuning is on our website at Serial Cable for iST and iES drives
Input voltage: 20-50 VDC
Pulse input frequency: 200kHz
Pulse voltage: 4.5-5 V
Logic signal current: 7 to 16 mA
Isolation resistance: 100 MΩ
Holding torque: 3.5Nm
Operating environment:
- Environment: Avoid dust, oil fog and corrosive gases.
- Ambient temperature: 0 to 40°C
- Humidity: 40 to 90% RH
- Operating temperature: 70°C
Storage temperature: -20 to 65°C
Motor length: 109 mm
Length of motor + drive: 122 mm
Shaft Dia: 8mm
No of Inputs: 3
No of Outputs: 1
Weight: 1.9 Kg
Faulty Goods and Warranty
Where such goods have been supplied we undertake to repair or replace them as quickly as possible.Prior to returning faulty items, please contact us with a description of the fault as one of our engineers might be able to assist you by resolving the issue over the phone.
A Warranty form must be filled out and returned with any goods.
Our standard warranty period is 12 months from the date of purchase unless stated otherwise.
Other warranty periods:
Labjack Products: 5 Years
Atop Products: 3 Years
MeanWell Products: 3 Years
Terracom Products: 3 Years
Warranty is subject to us being satisfied that a defect was caused by defective workmanship or materials and was not caused by or was not substantially contributed to by other factors beyond our control including incorrect installation, alterations or modifications of the product not recommended by the manufacturer.
Returns Policy
If you are dissatisfied with our goods you may return them within 14 days of the dispatch date. Contact us for an authorisation and we will refund your purchase less shipping costs and restocking fees. All returned goods MUST be in AS NEW condition including ALL PACKAGING and DOCUMENTATION / MANUALS etc.
Please note:
- The product returned will attract a 20% restocking fee.
- The customer must pay the delivery costs.
- Non standard, custom made or a specially manufactured or imported products are not returnable.
- Semiconductors, books and software are not refundable
Full Terms and Conditions
By placing an order with Ocean Controls, you agree to be bound by our Terms and Conditions of Trade.
