Next product

N1050-PR PID Temperature Controller, 24VAC/DC Powered

N1050-PR-24VAC/DC Compact sized PID temperature controller with vivid LCD display, auto tuning PID, soft start and ramp and soak. Input accepts thermocouples J, K, T and Pt100 sensors. Pulse and Relay outputs.

Quantity	ex GST	incl GST	Saving
1-4 items	$130.43 / each	N/A
5-9 items	$117.38 / each	N/A	save 10%
10 or more items	$110.87 / each	N/A	save 15%

N1050 is an advanced high performance PID temperature controller featuring a vivid LCD display in a modern design package. It combines the proven robustness of NOVUS PID algorithm with a large and bright easy-to-read multicolor 11-segment LCD display with alphanumeric mnemonics and crystal clear status signaling.

Besides the PID auto-tuning capability, N1050 outputs PWM control mode through pulse or relay. Up to three optional output relays can be selected. It also features 5 ramp-and-soak profile programs, soft start output and timer function which complement the advanced features of the controller. With password protected, all parameters are configurable by the display menu, via USB port or optional RS485 Modbus interface.

Easy to install and maintain due to its detachable connector, N1050 offers the lowest power consumption in the market. Housed in anti-flame material, it has 48x48 mm (DIN 1/16) format and low profile front panel. Suitable for hostile environments, it complies with standard EMC regulations, providing robustness and reliability including untapped temperature applications.

Power supply: 12 to 24 Vdc

Power Consumption: 6 VA

Sensor input:

J, K, T, thermocouples
Pt100 RTD

Internal Resolution: 15 bit (32767 levels)

Display: LCD type, alphanumeric with 11 segments.

Display Resolution: 12,000 levels (from -1999 to 9999)

Input Rate: Up to 10 per second

Accuracy (J, K, T thermocouples): 0.25 % of span ±1 °C

Accuracy (PT100): 0.2 % of span

PID Features: PWM, Auto tune

Control Action: 1 Loop (Heat or Cool)

Output Control: 1 Pulse and up to 3 Relays

Special Functions: Soft-Start, PID Loop Break, Ramp and Soak event, 2 Alarms (7 alarm types) and Timer Function

Configuration: Software NOVUS NConfig, via USB (micro-B type)

Communication protocol: RS-485 Modbus RTU (Optional)

Input Impedance (PT100 and thermocouples): > 10 MΩ

PT100 Excitation Current: 170 µA

Outputs:

Output 1: Voltage pulse 5 V, 25 mA

Output 2 and 3: SPST relay, 240 VAC, 1.5 A

Output 4: SPDT relay, 240 VAC, 3 A

Ramp & Soak: 5 Programs, 4 Segments

Programmable PWM cycle: From 0.5 seconds to 100 seconds

Operating environment: 0 to 50 ºC,

Relative humidity: 80 % RH (For temperature more than 30°C, reduce 3% for each °C)

Front panel: IP65, polycarbonate UL94 V-2

Enclosure: IP20, polycarbonate UL94 V-2

Dimension: 48 x 48 x 80 mm

QuickTune Software:

This controller can be configured and monitored using the QuickTune software

Faulty Goods and Warranty

Where such goods have been supplied we undertake to repair or replace them as quickly as possible.Prior to returning faulty items, please contact us with a description of the fault as one of our engineers might be able to assist you by resolving the issue over the phone.
A Warranty form must be filled out and returned with any goods.

Our standard warranty period is 12 months from the date of purchase unless stated otherwise.

Other warranty periods:

Labjack Products: 5 Years
Atop Products: 3 Years
MeanWell Products: 3 Years
Terracom Products: 3 Years

Warranty is subject to us being satisfied that a defect was caused by defective workmanship or materials and was not caused by or was not substantially contributed to by other factors beyond our control including incorrect installation, alterations or modifications of the product not recommended by the manufacturer.

Download Warranty Form

Returns Policy

If you are dissatisfied with our goods you may return them within 14 days of the dispatch date. Contact us for an authorisation and we will refund your purchase less shipping costs and restocking fees. All returned goods MUST be in AS NEW condition including ALL PACKAGING and DOCUMENTATION / MANUALS etc.

Please note:

The product returned will attract a 20% restocking fee.
The customer must pay the delivery costs.
Non standard, custom made or a specially manufactured or imported products are not returnable.
Semiconductors, books and software are not refundable

Full Terms and Conditions

By placing an order with Ocean Controls, you agree to be bound by our Terms and Conditions of Trade.