Akytec

Easy to mount the ITP11 fits into a standard 22.5 mm borehole for signal lamps and can be connected to any transmitter with a 4-20 mA output. The measured values are scalable and there is also an optional square root function.

Easy to mount the ITP14 fits into a standard 22.5 mm borehole for signal lamps and can be connected to 0-10V or 4-20mA signals. The measured values are scalable and there is NPN output for control or alarm function.

Easy to mount the ITP16 fits into a standard 22.5 mm borehole for signal lamps and can be connected to various RTDs (Pt100, Pt1000, and others) or thermocouples (K, J, and others) . There is NPN output for control or alarm function.

The ITP11-W easily mounts on a wall, DIN rail or a pipe and can be connected to any transmitter with a 4-20 mA output. The measured values are scalable and there is also an optional square root function.

An RS-485 Modbus Master or Modbus Slave datalogger. It logs up to 64 channels to micro SD card.

100 mm probe Pt100 RTD sensor with a standard head. 3-wire connection.

PR200.24.2.2 programmable relay with 8DI + 8DO + 4AI + 2AO (4-20 mA), LCD, 2x RS485 (Modbus RTU/ASCII). 24VDC powered.

The PRM is an extension module with 8 Digital Inputs and 8 digital outputs designed to expand the I/O-points of the PR200 Programmable Relay. Power 24 VDC

The analog input module MV110-24.8A has 8 analog inputs which can be connected to various types of RTDs, thermocouples, position encoders and standard signals.

PVT100-DM Duct Mount Humidity and Temperature Transmitter with 0-10 V / 4-20 mA outputs and Modbus RTU RS485 communications.

Easy to mount the ITP11 fits into a standard 22.5 mm borehole for signal lamps and can be connected to any transmitter with a 4-20 mA output. The measured values are scalable and there is also an optional square root function.

Easy to mount the ITP14 fits into a standard 22.5 mm borehole for signal lamps and can be connected to 0-10 V or 4-20 mA signals. The measured values are scale-able and there is NPN output for control or alarm function.

The ITP11-W easily mounts on a wall, DIN rail or a pipe and can be connected to any transmitter with a 4-20 mA output. The measured values are scalable and there is also an optional square root function.

The analog output module MU110-24.8I has 8 analog outputs (4-20 mA). The available voltage value at the outputs is 10 to 36 VDC.

One channel temperature controller TRM500 is provided with a universal input for a wide range of resistance thermometers and thermocouples. A relay output, an alarm output and a DC logic output are available for process control.

NOT BACKORDER AVAILABLE

The MK110-24.8D.4R Digital I/O-Module has 8 digital inputs and 4 relay outputs

The SMI200 is a programmable compact controller. It can be configured as a PLC/HMI or as a HMI. Instead of a number of inputs and outputs, the device is equipped with a Modbus RTU RS485 interface which allows communication to remote I/O modules and PLC's.  

PVT100 Humidity and Temperature Transmitter and Remote Probe with 0-10V/4-20 mA outputs and Modbus RTU RS485 communications. Remote probe cable length 2.5m.

MV110-24.8AS has 8 analog inputs (0-10 V, 0-5 mA, 0(4)-20 mA). The module requires 24 V DC power supply and supports Modbus RTU/ASCII communication via a serial RS485 interface.  

MV110-24.16DN has 16 digital inputs on board which are implemented as switch contacts, NPN or PNP. In addition, the MV110-24.16DN version has galvanically isolated inputs in groups of 4. 

Digital output module MU110-24.8K has 8 digital outputs (NPN). The max. current load is 400 mA at 60 VDC. 

Digital output module MU110-24.16R has 16 digital outputs (relay). The max. current load is 3 A at 250 V AC or 30 V DC. The outputs are galvanically isolated in groups of 4. 

Digital output module MU110-24.16K has 16 digital outputs (NPN). The max. current load is 400 mA at 60 VDC.