Ocean Controls

This kit has the electronics you need to get a CNC machine up and running with 3 × 0.25 N·m (36 oz·in) Stepper Motors and drivers.

This kit has the electronics you need to get a CNC machine up and running with 3 × 0.43 N·m (61 oz·in) Stepper Motors and drivers.

This kit has the electronics you need to get a CNC machine up and running with 3 × 0.9 N·m (125 oz·in) motors with encoders and drivers.

This kit has the electronics you need to get a CNC machine up and running with 3 × 1 N·m (140 oz·in) Stepper Motors and drivers.

This kit has the electronics you need to get a CNC machine up and running with 3 × 1.85 N·m (262 oz·in) Stepper Motors and drivers.

This kit has the electronics you need to get a CNC machine up and running with 3 × 12 N·m (1700 oz·in) Stepper Motors and drivers.

This kit has the electronics you need to get a CNC machine up and running with 3 × 120W Brushed DC servo motors and drivers.

This kit has the electronics you need to get a CNC machine up and running with 3 × 180W brushless DC servo motors and drivers.

This kit has the electronics you need to get a CNC machine up and running with 3 × 2 N·m (280 oz·in) motors with encoders and drivers.

Dual 10K, 5%, 1W resistors for general purpose use

Dual 120 Ohm, 5%, 1W resistors for RS-485 bus termination or general purpose use

Dual 1K Ohm, 5%, 1W resistors for adapting 12V systems to Leadshine stepper motor drives

Dual 2K2 Ohm, 5%, 1W resistors for adapting 24V systems to Leadshine stepper motor drives

Dual 4K7 Ohm, 5%, 1W resistors for general purpose use

DIN rail mounting. Isolated DC output up to 1A. Short circuit and overload protection.

DIN rail mounting. Isolated DC output up to 250mA. Short circuit and overload protection.

DIN rail mounting. Isolated DC output up to 500mA. Short circuit and overload protection.

DIN rail mounting. Isolated DC output up to 125mA. Short circuit and overload protection.

470 Ohm & 330 Ohm Resistive Divider, for stepping down a 24V DC supply to 10V. Useful as a feed voltage to a potentiometer for 0-10V control for VSD, etc.

This kit has the electronics you need to get a CNC machine up and running with 3 × 3 N·m (426 oz·in) motors with encoders and drivers.

This kit has the electronics you need to get a CNC machine up and running with 3 × 3 N·m (430 oz·in) Stepper Motors and drivers.

4K7 and 10K, 5%, 1W resistors for voltage divider or general purpose applications

Trigger SMS alarms using up to 16 isolated digital inputs.

4 independent channels with switch-selectable NPN or PNP input and NPN or PNP output. Can be used as a NPN - PNP converter or as an isolator to eliminate noise and ground loops