Isolated Analog Signal Converter, Dual Output
Slim isolated signal converter with dual output converts a single, selectable analog input signal to dual analog outputs. The input signal type and each output signal type can be configured with on-board DIP switches.
Slim (17.5 mm wide)isolated selectable analog input signal with selectable dual analog outputs. It features on-board DIP switches that enable the user to select their preferred input/output signal.
LED indicates that the auxiliary supply is present, plus the input signal is present (approx 5% of full input range), a third LED signals that the output is present (approx 5% of full output range)
Units will be supplied unless otherwise requested at factory default of input 4 to 20 mA and outputs set to 4 to 20 mA. Changing the outputs or input via the dip switches will cause the accuracy to drift this can be rectified by using the Span and Zero potentiometers.
- Input Signal Types: 0 to 5 VDC, 0 to 10 VDC, 1 to 5 VDC, 2 to 10 VDC, 0 to 20 mA, 4 to 20 mA
- Power Supply: 20 to 56 VAC/DC
- Accuracy: ≤±-0.2% FS
- Response time: ≤250 ms
- Output ripple: ≤±0.1% FS
- Output span adjust: ±10% via potentiometer
- Output zero adjust: ±10% via potentiometer
- Input impedance: 0 to 20 mA, 4 to 20 mA: 250 Ω, 0 to 5 V, 0 to 10 V, 1 to 5 V, 2 to 10 V: 1 MΩ
- Output impedance:0 to 20 mA, 4 to 20 mA: 520 Ω, 0 to 5 VDC, 1 to 5 VDC 500 Ω, 0 to 10 VDC, 2 to 10 VDC 1 KΩ
- Operating temp: 0 to 60 °C
- Operating humidity: 20 to 95% RH, non condensing
- Temp coefficient: ≤100 PPM/ C
- Isolation: 2KV AC for 1 min
- Standards: IEC 61010 (category 3)
- EMC: EN55011:2002
- EN61326:2003
- CE marked:Yes
- RoSH compliant:Yes
- Manufacturer's Part: FOX.ISC-2-ADL
Faulty Goods and Warranty
Where such goods have been supplied we undertake to repair or replace them as quickly as possible.Prior to returning faulty items, please contact us with a description of the fault as one of our engineers might be able to assist you by resolving the issue over the phone.
A Warranty form must be filled out and returned with any goods.
Our standard warranty period is 12 months from the date of purchase unless stated otherwise.
Other warranty periods:
Labjack Products: 5 Years
Atop Products: 3 Years
MeanWell Products: 3 Years
Terracom Products: 3 Years
Warranty is subject to us being satisfied that a defect was caused by defective workmanship or materials and was not caused by or was not substantially contributed to by other factors beyond our control including incorrect installation, alterations or modifications of the product not recommended by the manufacturer.
Returns Policy
If you are dissatisfied with our goods you may return them within 14 days of the dispatch date. Contact us for an authorisation and we will refund your purchase less shipping costs and restocking fees. All returned goods MUST be in AS NEW condition including ALL PACKAGING and DOCUMENTATION / MANUALS etc.
Please note:
- The product returned will attract a 20% restocking fee.
- The customer must pay the delivery costs.
- Non standard, custom made or a specially manufactured or imported products are not returnable.
- Semiconductors, books and software are not refundable
Full Terms and Conditions
By placing an order with Ocean Controls, you agree to be bound by our Terms and Conditions of Trade.
