Fully Isolated CAN to RS-485 Converter
Converts CAN to RS-485 through a 2.0 kV optical isolation barrier. Supports CAN2.0A and CAN2.0B protocol. Screw terminals for all other RS485, CAN and power connections.
The CAN485 converter is used for data exchange between a CAN-bus field bus and a RS-485 bus and supports Modbus RTU protocol. The CAN485 interface integrates a RS-485 channel and a CAN bus channel. The CAN485 RS-485 channel supports a variety of baud rate from 300bps~115200bps. The CAN-bus channel supports CiA recommended a variety of standard baud rate and user-defined baud rate, the range of 2.5Kbps~1Mbps. The CAN485 interface converter provides three types of data conversion: transparent conversion, encryption conversion and Modbus protocol conversion.
Its exterior design supports DIN-Rail mounting and Wall mounting, which is convenient for engineering application. The board comes with a photoelectric isolation module, complete electrical isolation control circuit and CAN-bus communication circuit, so that the CAN485 converter has a strong anti-interference ability, greatly improving the system reliability in harsh environments
- Bidirectional data communication between CAN-bus and RS-485
- Support CAN2.0A and CAN2.0B protocol, in compliance with the ISO/DIS 11898 specification
- Integrated 1 CAN-bus communication interface, support for user-defined baud rate
- Integrated 1 RS-485 three pins type communication interface, communication rate between 300~115200bps can be set
- Provide three kinds of data conversion modes: transparent conversion, encryption conversion, Modbus protocol conversion
- Power: 9 VDC (9~48 VDC)
- Current Consumption:180 mA maximum
- RS-485 Standard: EIA RS-485
- RS-485 signals: D+, D-, GND
- S-485 Baud rate: 300 to 115200 bps
- CAN Standard: CAN2.0A, CAN2.0B
- CAN port number:1
- CAN signal: CANL, CANH, GND, RES+, RES-
- CAN Baud rate: 2.5 K 1 Mbps
- CAN Transfer distance: 40 m~10 Km
- Working Temperature: -20 to 75 ºC
- Storage Temperature: -25 to 85 ºC
- Working Humidity:
- Material: IP40 protect grade
- Dimensions: 69 × 22 ×100 mm
Faulty Goods and Warranty
Where such goods have been supplied we undertake to repair or replace them as quickly as possible.Prior to returning faulty items, please contact us with a description of the fault as one of our engineers might be able to assist you by resolving the issue over the phone.
A Warranty form must be filled out and returned with any goods.
Our standard warranty period is 12 months from the date of purchase unless stated otherwise.
Other warranty periods:
Labjack Products: 5 Years
Atop Products: 3 Years
MeanWell Products: 3 Years
Terracom Products: 3 Years
Warranty is subject to us being satisfied that a defect was caused by defective workmanship or materials and was not caused by or was not substantially contributed to by other factors beyond our control including incorrect installation, alterations or modifications of the product not recommended by the manufacturer.
Returns Policy
If you are dissatisfied with our goods you may return them within 14 days of the dispatch date. Contact us for an authorisation and we will refund your purchase less shipping costs and restocking fees. All returned goods MUST be in AS NEW condition including ALL PACKAGING and DOCUMENTATION / MANUALS etc.
Please note:
- The product returned will attract a 20% restocking fee.
- The customer must pay the delivery costs.
- Non standard, custom made or a specially manufactured or imported products are not returnable.
- Semiconductors, books and software are not refundable
Full Terms and Conditions
By placing an order with Ocean Controls, you agree to be bound by our Terms and Conditions of Trade.