Davis Instruments 6410 Anemometer for Vantage Pro2™ & Vantage Pro®
High quality wind speed and direction sensor as used by the Davis Vantage Pro2™ & Vantage Pro® weather stations. Suits our anemometer interface cards KTL-250.
The Anemometer includes both wind speed and wind direction sensors.
The sensor is made of rugged components stand up to hurricane-force winds, yet are sensitive to a light breeze. Includes sealed stainless-steel bearings for long life. Wind-tunnel tested to speeds in excess of 200 miles per hour! Wind speed range: 1 to 200 mph, 1 to 173 knots, 0.5 to 89 m/s, 1 to 322 km/h.
In areas where icing of the anemometer is a problem, use Anemometer Drip Rings to deflect water from the joint between moving parts.
- Wind Speed: Wind cups and magnetic switch
- Wind Speed Range: 1 to 200 mph, 1 to 173 knots, 0.5 to 89 m/s, 1 to 322 km/h
- Wind Direction: Wind vane and free-spinning potentiometer
- Operating Temperature: -40 to +65°C
- Attached Cable Length: 12m (40')
- Connector Type: Modular connector (RJ-11)
- Dimensions: 381L x 38W x 457H (mm)
Faulty Goods and Warranty
Where such goods have been supplied we undertake to repair or replace them as quickly as possible.Prior to returning faulty items, please contact us with a description of the fault as one of our engineers might be able to assist you by resolving the issue over the phone.
A Warranty form must be filled out and returned with any goods.
Our standard warranty period is 12 months from the date of purchase unless stated otherwise.
Other warranty periods:
Labjack Products: 5 Years
Atop Products: 3 Years
MeanWell Products: 3 Years
Terracom Products: 3 Years
Warranty is subject to us being satisfied that a defect was caused by defective workmanship or materials and was not caused by or was not substantially contributed to by other factors beyond our control including incorrect installation, alterations or modifications of the product not recommended by the manufacturer.
Returns Policy
If you are dissatisfied with our goods you may return them within 14 days of the dispatch date. Contact us for an authorisation and we will refund your purchase less shipping costs and restocking fees. All returned goods MUST be in AS NEW condition including ALL PACKAGING and DOCUMENTATION / MANUALS etc.
Please note:
- The product returned will attract a 20% restocking fee.
- The customer must pay the delivery costs.
- Non standard, custom made or a specially manufactured or imported products are not returnable.
- Semiconductors, books and software are not refundable
Full Terms and Conditions
By placing an order with Ocean Controls, you agree to be bound by our Terms and Conditions of Trade.
