MW5502C 2-Port Industrial WiFi to Modbus TCP/RTU/ASCII Gateway

In stock (1 item available)
  • Weight
    0.5 kg
  • SKU

MW5502C Industrial Wireless Modbus Gateway will provide you a flexible platform to convert bi-directionally Modbus RTU/ASCII/TCP through wired and wireless Ethernet Networks.

Buy more for less:
1-4 items AUD715.00 / each  
5-9 items AUD643.50 / each save 10%
10 or more items AUD607.75 / each save 15%
  • AUD715.00

Diverse Hardware, Integrated Wireless, Serial and Ethernet

MW5502C Industrial Wireless Modbus Gateway will provide you a flexible platform to convert bi-directionally Modbus RTU/ASCII/TCP trough wired and wireless Ethernet Networks. It supports IEEE802.11 b/g/n standards over 2.4GHz for Wireless connectivity, wired Ethernet through one RJ45 port and supports the four most commonly used communication standards in Serial: RS-232/485 and 422 on two 5-Pin Terminal Block connectors. The ease-of-use configuration utility provided with Modbus Gateway can quickly select the hardware interface , and easily switch to the existing communication infrastructure.

Switching between Modbus Protocols

Modbus Gateway supports the standard Modbus protocol and is capable of converting any Modbus protocols between Modbus TCP, Modbus RTU, and
Modbus ASCII for all supported hardware interfaces.

Modbus ID Routing

Modbus Gateway supports various types of hardware communication interfaces, Modbus protocol conversion, and Modbus ID routing. Therefore the Modbus Gateway can integrate your existing and complex Modbus hardware configuration into a simple network that can be easily managed.

The MB5001C series supports the three most commonly used serial communication interfaces, RS-232, RS-422 and RS-485. It also provides a web-based configuration UI, so the users can select the serial interface easily.


  • Rugged metal housing for wall or panel mount (DIN rail adapter clips available)
  • Ease-of-use in Modbus protocol conversion include RTU, ASCII and TCP
  • 10/100 Mbps fast Ethernet full duplex auto negotiation
  • Monitor, manage and control industrial field devices remotely
  • Web server / Utility configuration
  • Supports WiFi-Direct for Simple Peer Pairing


  • Input:  9 to 48 VDC (screw terminals)
  • Consumption: ≤ 5.8 W


  • Interface: RS-232/422/485 software selectable 
  • Ports: 2 - port
  • Baud rate: 110 ~ 921,600 bps software selectable  
  • Parity: None, Odd, Even, Mark, Space 
  • Data bits: 5, 6, 7, 8 software selectable 
  • Stop bits: 1, 2 
  • Flow control:
    • None
    • Software: Xon/Xoff
    • Hardware: RTS/CTS


  • Transmission rate: 10/100M Auto-detection 
  • Port: 1
  • Connector: RJ-45
  • Compliance: IEEE802.3
  • Auto MDI/MDI-X: Yes

Link Mode

  • Modbus TCP: Yes 
  • Modbus ASC: Yes 
  • Modbus RTU: Yes 


  • Wireless PCI-e Module: Atheros AR9382 
  • Tx / Rx:  1T1R MIMO (1 x 1 with MCS 0-7) 
  • Standard Conformance:  802.11b, 802.11g, and 802.11n
  • Compliance: IEEE802.3
  • Operating Frequency: 2.4Ghz 


  • Operating Temperature: -10 to 60 °C
  • Storage Temperature: 40 to 80 ºC, 5 to 95% RH  


  • EMC: FCC Class A, CE Class A


  • W x H x D: 47 mm x 110 mm x 90mm  

Faulty Goods and Warranty

Where such goods have been supplied we undertake to repair or replace them as quickly as possible.Prior to returning faulty items, please contact us with a description of the fault as one of our engineers might be able to assist you by resolving the issue over the phone.
A Warranty form must be filled out and returned with any goods.

Our standard warranty period is 12 months from the date of purchase unless stated otherwise.

Other warranty periods:

Labjack Products: 5 Years
Atop Products: 3 Years
MeanWell Products: 3 Years
Terracom Products: 3 Years

Warranty is subject to us being satisfied that a defect was caused by defective workmanship or materials and was not caused by or was not substantially contributed to by other factors beyond our control including incorrect installation, alterations or modifications of the product not recommended by the manufacturer.

Returns Policy

If you are dissatisfied with our goods you may return them within 14 days of the dispatch date. Contact us for an authorisation and we will refund your purchase less shipping costs and restocking fees. All returned goods MUST be in AS NEW condition including ALL PACKAGING and DOCUMENTATION / MANUALS etc.

Please note:

  • The product returned will attract a 20% restocking fee.
  • The customer must pay the delivery costs.
  • Non standard, custom made or a specially manufactured or imported products are not returnable.
  • Semiconductors, books and software are not refundable

Full Terms and Conditions

By placing an order with Ocean Controls, you agree to be bound by our Terms and Conditions of Trade.

Related products

Drop items here to shop
Product has been added to your cart