N322-NTC-485 Thermostat Controller with NTC Sensor and RS-485, 230 VAC

N322-NTC-485 Thermostat Controller with NTC Sensor and RS-485, 230 VAC

SKU: CET-0011

Panel mount thermostat with included NTC sensor on 2 m lead. Configurable for a huge range of heating and cooling applications. 230VAC powered.

CET-001 HAS BEEN REPLACED BY CET-0011, WHICH HAS RS485

Novus
  • Manufacturer: Novus
Buy more for less:
1-4items$68.90/ each 
5-9items$62.01/ eachsave10%
10or more items$58.57/ eachsave15%
  • $68.90
Qty:  
In stock(4 items available)

The Novus N322 Thermostat is a budget priced On-Off temperature controller with industrial level reliability. This model includes an NTC thermistor, has an RS-485 Modbus communication interface and is powered from 230 VAC. Other models don't have RS-485, are 12 to 24 V AC/DC powered or take PT100 input or J, K and T type thermocouple input.

The NTC thermistor models are provided with a waterproof stainless steel NTC Thermistor probe and 2 metre long cable to get you up and running immediately. This cable can be extended to 50 metres.

The N322 thermostats have two relay outputs which can be configured for heating or cooling or a number of different alarm modes and are easily configured by the front panel buttons and display.

The temperature and status of relays are shown on the LED Display. Great for aquariums, home brewing, ovens, fridges, greenhouses and many other applications.

RS-485 Modbus communications allows the temperature, output status and all configuration variables to be accessed from a PLC, computer or building management system.

Features:

  • Included sensor
  • IP65 when mounted in panel
  • Fully configurable
  • Heating or cooling actions
  • Configurable hysteresis
  • Configurable start-up delay to reduce inrush current when using multiple controllers
  • Configurable minimum on and off times to extend compressor or heater life
  • Over /under temperature and in-bound / out-of-band alarms
  • Optional multi-level password protection
  • 24VAC powered
  • 1 × SPDT output and 1 × SPST output with programable functionality
  • RS-485 Modbus RTU communication interface

Output Relays and Modes:

  1. 16 A, 250 VAC, SPDT Relay
    • Heating
    • Cooling
  2. 5 A, 250 VAC, SPST Relay
    • Heating
    • Cooling
    • Low Alarm
    • High Alarm
    • Inside Range Alarm
    • Outside Range Alarm
    • Low Alarm with Initial Blocking
    • High Alarm with Initial Blocking
    • Inside Range Alarm with Initial Blocking
    • Outside Range Alarm with Initial Blocking

Documents:

    • SKU
      CET-0011
    • Weight
      0.28 kg
    • Dimensions (L x W x H)
      10 x 8 x 10 cm

Specifications:

Power supply100 to 240 Vac /dc ±10%
Display3 digit LED
Sensor inputNTC (included)
Temperature range-50 to 120 °C
Temperature accuracy±0.6 °C
Output 1SPDT, 1 HP (16 A resistive), 250 VAC
Output 2SPST, 5 A resistive, 250 VAC
Sampling time1.5 samples per second
Dimensions75 × 33 × 75 mm
Panel cutout70 × 29 mm

Faulty Goods and Warranty

Where such goods have been supplied we undertake to repair or replace them as quickly as possible.Prior to returning faulty items, please contact us with a description of the fault as one of our engineers might be able to assist you by resolving the issue over the phone.
A Warranty form must be filled out and returned with any goods.

Our standard warranty period is 12 months from the date of purchase unless stated otherwise.

Other warranty periods:

Labjack Products: 5 Years
Atop Products: 3 Years
MeanWell Products: 3 Years
Terracom Products: 3 Years

Warranty is subject to us being satisfied that a defect was caused by defective workmanship or materials and was not caused by or was not substantially contributed to by other factors beyond our control including incorrect installation, alterations or modifications of the product not recommended by the manufacturer.

Returns Policy

If you are dissatisfied with our goods you may return them within 14 days of the dispatch date. Contact us for an authorisation and we will refund your purchase less shipping costs and restocking fees. All returned goods MUST be in AS NEW condition including ALL PACKAGING and DOCUMENTATION / MANUALS etc.

Please note:

  • The product returned will attract a 20% restocking fee.
  • The customer must pay the delivery costs.
  • Non standard, custom made or a specially manufactured or imported products are not returnable.
  • Semiconductors, books and software are not refundable

Full Terms and Conditions

By placing an order with Ocean Controls, you agree to be bound by our Terms and Conditions of Trade.

Related products

Customers who viewed this product also bought