LabJack

The LabJack U12 is the simplest member of the family, with 12 analog inputs (12 bit ±10 VDC, programmable gain amplifier), 20 digital IO, 2 voltage outputs and USB interface.

Screw terminal connections, with short-circuit and overvoltage protection, for the extra 16 digital I/O on the LabJack U12.

EI-1022 is a plastic temperature probe, with a linear output of 10 mV per degree K. Operating temperature range from -40 to +100 °C.

High-level linear voltage output and high accuracy. Operating temperature range from 0 to +150 °C.

Plugs directly into the bottom of a LabJack U6, UE9 or T7 to give screw terminal access to extra IO signals.

Provides convenient screw terminal access to 12 digital I/O available on a DB15 connector.

Plugs directly into the bottom of a LabJack - U12 via the DB25 connector. The card doesn't come with relays loaded, it is a bare PCB that will accept either 16 miniature style relays or 8 standard size relays.

80 channel analog multiplexor for U6, UE9 and T7 Labjack data acquisition modules.

Short, 37 pin cable suits the expansion plug on the LabJack U6, U6-Pro, UE9 and UE9-Pro.

The most economical member of the LabJack family, the U3-LV has 16 flexible I/O (digital input, digital output, 12 bit 0 to 3.6 VDC analog input), 2 voltage outputs and USB interface.

The most economical member of the LabJack family, the U3-HV has 12 flexible I/O (digital input, digital output, 12 bit 0 to 3.6 VDC analog input), 4 HV analog inputs (12 bit -10 to 20 VDC), 2 voltage outputs and USB interface.

OEM version of the Labjack U3-LV. Most through-hole components are not installed, making the U3-OEM very flexible.

Is designed to plug directly into the bottom of a U3/U6/U9/T7 series via the DB15 connector, using the 12 EIO/CIO lines to control up to 12 I/O modules. Output or input types of digital I/O modules can be used. The card doesn't come with relays loaded, it is a bare PCB that will accept either 16 miniature style relays or 8 standard size relays.

OEM version of the Labjack U3-HV. Most through-hole components (USB and DB15 connector, screw terminals etc) are not installed, making the U3-OEM very flexible. See the U3 User's Guide for more information. Ships with the board only. All documentation, drivers, and examples are available online. DAQFactory Express is not included.

The T4 is a USB or Ethernet multi function DAQ device with up to 12 analogue inputs or 16 digital I/O, 2 analog outputs (10-bit), and multiple digital counters/timers

The T4-OEM is a USB or Ethernet multifunction DAQ device with up to 12 analogue inputs or 16 digital I/O, 2 analog outputs (10-bit), and multiple digital counters/timers

A signal conditioning module that divides 2 single-ended uni-polar channels of 0 to 25 V analog signals down to 0 to 2.5 V signals. V_output = V_input/4 

A signal conditioning module that divides 2 single-ended uni-polar channels of 0 to 10 V analog signals down to 0 to 2.5 V signals. V_output = V_input/4 

The LJTick-Resistance (LJT-Rx) makes it easy for LabJack devices to measure resistive sensors.

The LJTick-Resistance (LJT-Rx) makes it easy for LabJack devices to measure resistive sensors.

The LJTick-Resistance (LJT-Rx) makes it easy for LabJack devices to measure resistive sensors.

The LJTick-VRef is a Voltage reference accessory that outputs a stable 2.5V signal. Can be used with the Labjack U3, U6, UE9, T4 and T7 data acquisition modules

The LJTick-VRef is a Voltage reference accessory that outputs a stable 4.096V signal. Can be used with the Labjack U3, U6, UE9, T4 and T7 data acquisition modules

Plugs directly into the standard screw terminal block found on newer U3/U6/UE9/T4/T7. On board switch allows 5 various gain settings, one of them being custom.