IO Modules Modbus RTU

MOD-IO9 is a Modbus RTU I/O Module with Wall Mounting Enclosure. Ideal for remote zoning applications. 2 x resistive inputs (up to 65kOhm). 2 x volt-free digital inputs. 3 x 0..10Vdc analogue outputs. 2 x 24Vac triac outputs. 24Vac power supply.

Yotta Control is based in Taiwan. The A-1058 Remote Modbus module provides 12 transistor Digital Outputs (sink). RS-485 interface supports a Modbus RTU/ASCII protocol.

Yotta Control is based in Taiwan. The A-1057 Remote Modbus module provides 12 transistor Digital Outputs (source). RS-485 interface supports a Modbus RTU/ASCII protocol.

Yotta Control is based in Taiwan. The A-1051 Remote Modbus module provides 16 Isolated Digital Inputs. RS-485 interface supports a Modbus RTU/ASCII protocol.

Yotta Control is based in Taiwan. The A-1012 Remote Modbus module provides 2 digital inputs, 2 Analog Inputs (0/4 to 20 mA), 2 PT100 Analog Inputs, 2 transistor digital outputs and 2 analog outputs. It uses optical isolators to prevent ground loop effects and limits damages from power surges. RS-485 interface supports a simple ASCII protocol and Modbus RTU.

Yotta Control is based in Taiwan. The A-1080 Remote Modbus module provides 8 Digital Output HID Relay suitable for high intensity discharge lighting. RS-485 interface supports Modbus RTU/ASCII protocol.

Yotta Control is based in Taiwan. The A-1069 Remote Modbus module provides 8 Digital Output Power Relay suitable for switching higher currents. RS-485 interface supports Modbus RTU/ASCII protocol.

Yotta Control is based in Taiwan. The A-1068 Remote Modbus module provides 8 Digital Output Signal Relay suitable for switching small current signals such as audio. RS-485 interface supports Modbus RTU/ASCII protocol.

Yotta Control is based in Taiwan. The A-1055 Remote Modbus module provides 8 Isolated Digital Inputs and 8 transistor Digital Outputs (sink). RS-485 interface supports a Modbus RTU/ASCII protocol.

Yotta Control is based in Taiwan. The A-1055S Remote Modbus module provides 8 Isolated Digital Inputs and 8 transistor Digital Outputs (source). RS-485 interface supports a Modbus RTU/ASCII protocol.

Yotta Control is based in Taiwan. The A-1060 Remote Modbus module provides 8 Isolated Digital Inputs and 4 Digital Output Power Relay. RS-485 interface supports Modbus RTU/ASCII protocol.

Yotta Control is based in Taiwan. The A-1010 Remote Modbus module provides 8 Analog Inputs (0~10v), 4 transistor digital outputs and 2 analog outputs (0~10v). RS-485 interface supports a simple ASCII protocol and Modbus RTU.

The Novus DigiRail 2A accepts thermocouples, Pt100 sensors, millivolts up to 50 mV, voltage up to 10 V or current up to 20 mA with programmable linearisation and engineering units. Fully isolated. Outputs Modbus RTU over RS-485.

The Novus DigiRail 4C is a quad input counter and digital input module. Counts at up to 100 kHz (input 1 only), with 32-bit counting registers. Outputs Modbus RTU over RS-485.

The Novus DigiRail Connect DMIX features both a Modbus TCP and Modbus RTU communications and has 8 digital input and counter (32bit) and 4 Relay out. Counts are stored in non-volatile memory so they are not lost after power failure.

The Novus DigiRail Connect DMIX features both a Modbus TCP and Modbus RTU communications and has 8 digital input and counter (32bit) and 8 Digital out. Counts are stored in non-volatile memory so they are not lost after power failure.

The Novus DigiRail Connect RAMIX features both a Modbus TCP and Modbus RTU communications and has 2 universal analog inputs, 2 analog out, 4 digital input and counter (32bit) and 2 relay out. Counts are stored in non-volatile memory so they are not lost after power failure.

The Novus DigiRail Connect RAMIX features both a Modbus TCP and Modbus RTU communications and has 2 universal analog inputs, 2 analog out, 4 digital input and counter (32bit) and 3 digital out. Counts are stored in non-volatile memory so they are not lost after power failure.

Digirail Modbus Module 2 Relay Outputs

The Novus DigiRail VA is a DIN-rail mount measurement transducer for single phase AC power. It can measure voltage, current, power (real, apparent, reactive, power factor) and frequency up to 300 VAC and 5 A AC. It has 4 to 20 mA and 0 to 10 V retransmission outputs and RS-458 and USB for Modbus RTU communication.

Four analog inputs(4-20mA, 12 bit), two analog outputs (4-20mA, 12 bit), four digital inputs with high speed counters, two relay outputs. USB and dual RS-485 ports; can be polled by multiple masters simultaneously.

Modbus RS-485, USB, and Ethernet I/O module. DIN rail mountable. 8 relays, 4 opto-isolated inputs, 3 analog inputs.

The PRO1 series is a range of 1 module, single phase Smart Energy Meters consisting of 4 different types, each with their specific characteristics. They have an exceptional combination of a high accuracy class (1/B) and a broad temperature range from -25°C to +45°C. Another unique feature is the Imax of 45 A.

The PRO380 CT series is a range of 4 module, three phase CT smart Energy Meters consisting of 3 different types each with their specific characteristics. They have an exceptional combination of a high accuracy class (1/B) and a broad temperature range of -25OC to +45OC.