CS3E-D507 7A EtherCAT 2 Phase CS Series Closed Loop Stepper Drive
SKU: SMC-171
CS3E-D507 is a new Ethercat closed-loop stepper motor driver with encoder feedback input, operating at 20-50 VDC. Suits 2 phase stepper motors up to 7.0 A. Has digital inputs and outputs for control such as limit switch and brake.
The newly released CS3E-D507 supports CANopen over EtherCAT (CoE) control and CiA 402 operating modes including Profile Position (PP), Profile Velocity (PV), Homing (HM) and Cyclic Synchronous Position (CSP). The product can be matched with many brands of EtherCAT controller/PLC such as Beckhoff, Omron, Trio, Keneyce etc.
The CS3E-D507 is able to power 2 phase and 4 phase NEMA 23 and 24 stepper motors with incremental encoders. Leadshine CS3E-D507S is a closed loop stepper drive designed to solve the loss of step problem in open loop stepper control systems, thus increase system reliability at minimal cost increase. It implements advanced control algorithm of Leadshine based on its tens of years’ experience in stepper and servo controls. It is highly reliable and affordable and performs excellently in many industrial applications such as CNC, medical, electronics, packaging...
Compared with traditional open loop stepper systems, the CS3E-D507S adopted closed loop step system can eliminate potential loss of step, make real-time position error correction, and do not need torque reservation (100% torque implementation). Also it can power the driven stepper motor with reduced heating, lower noise, low vibration…
Features:
- No loss of step, No hunting, No torque reservation
- CANopen over EtherCAT (CoE) with full support of CiA402,100Mbps full-duplex
- Support operation modes: Profile Position, Profile Velocity, Cyclic Synchronous Position, Homing
- 7 configurable digital inputs, 7 optically isolated digital outputs include brake output
- Low noise and vibration, smooth motion
- 20-50VDC supply voltage, max 7A output current
- USB port for parameters configuration
- Encoder resolution: 1000 / 5000 line for NEMA 23/24 CS motors
- Two 7-segment display velocity or slave ID or operation mode or error code
- Protections for over voltage, over current and position following error, encoder cable error, etc
- CE certified and RoHS compliant
| Model: | CS3E-D507 |
| Phase: | 2 |
| Control Mode: | EtherCAT |
| Input Voltage Range: | 20 - 50 VDC |
| Suggested Power Supply Voltage Range: | 24 - 48 VDC |
| Software Cofig. Current Range: | 0.5 - 7.0 A (default by 6.0 A, increased by 0.1 A) |
| Switch Functions: | 0 - 255 node ID |
| Communication Type: | Micro-USB for tuning, EtherCAT for networking control |
| # of Digital Inputs: | 7 |
| Digital Inputs: | Touch probe, limit switch signal, origin signal and GPIOs |
| # of Digital Outputs: | 7 |
| Digital Outputs: | Fault outout, in position and GPIOs, and special brake output(24V / 500mA) |
| Operation Mode: | CSP, PP, PV, HM |
| Protection: | Over current; over voltage; chip error; motor cable error; ROM error; auto-tuning error; position following error; |
| Environment: | Avoid dust, oil fog and corrosive gases |
| Operating Temperature: | 0 - 50 °C |
| Humidity: | 40 - 95% RH |
| Vibration: | 5.9 m/s2 Max |
| Storage Temperature: | -20 - 65°C |
| Mechanical: | 130 * 90.4 * 34.0 mm |
| Weight: | 650g |
Cables:
To connect this driver to a matching Easy Servo motor, you'll also want power and encoder extension cables.
3 meter | 5 meter | 8 meter | 10 meter | |
|---|---|---|---|---|
Power | - | |||
Encoder | - |
Programming Cable:
The drive can be tuned with the ProTuner software and an RJ-12 to DE-9 serial cable.
Dispatch
In-stock orders are dispatched within 2 business days.
Shipping options
We deliver across Australia and internationally by any of the following methods:
- Australia Post Express
- Australia Post Parcel Post
- DHL
- FedEx (only international)
- Freight account. We'll email packaging dimensions when the shipment is ready to be book.
*Transit times vary depending on the shipping method and destination.
Store Pickup - Carrum Downs, Victoria, 3201
Order before 11am to collect after 2pm the same day. Mon–Fri, 9am–5pm, excludes public holidays.
RETURNS
How to return an item Contact us before sending anything back. Email info@oceancontrols.com.au or call +61 3 9708 2390. We'll confirm eligibility and guide you to the return process.
Return window 14 days from dispatch date.
Condition required Items must be unused and in original packaging, including all documentation and manuals.
Restocking fee A 20% restocking fee applies to all accepted returns. Return shipping costs are the customer's responsibility.
Non-returnable items
- Custom-made or specially imported products
- Software licences (some software have trial versions available)
- Items not in original, as-new condition
WARRANTY
How to make a warranty claim Before returning anything, please contact us. Our engineers can often resolve the issue remotely. If a return is required, our team will provide you with a warranty form to include with the goods.
What's covered Defects in materials and workmanship under normal use and correct installation.
What's not covered The warranty does not cover damage or failures caused by factors outside our control, including incorrect installation, unauthorised alterations or modifications, or any installation or use not recommended by the manufacturer.
Standard warranty All products carry a 12-month warranty from the date of purchase unless stated otherwise.
Extended warranty
- Labjack: 5 Years
- Atop: 5 Years
- MeanWell: 3 Years
- Teracom: 3 Years
- Novus: 3 Years
Related products
![4.5 N.m 2 Phase NEMA 34 CS Series Closed-Loop Stepper Motor IP65]()
- % off
