Ocean Controls

Miscellaneous Parts

Extra Freight Charges

We can configure TxRail, TxIsoRail, TxBlock, TxIsoBlock, TxMniBlock, RHT-WM, RHT-DM, TEMP-WM or TEMP-DM modules if you do not wish to purchase a TxConfig Cable.

Two channel relay card with flexible inputs. Each relay is rated to 7A at 240VAC, 10A at 28VDC. Operates from a 12VDC supply.

Dual channel relay card with flexible inputs. Each relay is rated to 7A at 240 VAC, 10A at 28VDC. Operates from a 24VDC supply.

Useful for extending RF signals to externally mounted antennas

Dual 250 Ohm, 0.1%, 1W resistors, suitable for converting 4 to 20 mA loops to 1 to 5V.

Dual 500 Ohm, 0.1%, 1W resistors, suitable for converting 4 to 20 mA loops to 2 to 10V

Dual 1K Ohm, 5%, 1W resistors for adapting 12V systems to Leadshine stepper motor drives

Dual 4K7 Ohm, 5%, 1W resistors for general purpose use

Dual 2K2 Ohm, 5%, 1W resistors for adapting 24V systems to Leadshine stepper motor drives

4K7 and 10K, 5%, 1W resistors for voltage divider or general purpose applications

Dual 10K, 5%, 1W resistors for general purpose use

Two 1N4004 Diodes rated to 1A forward current, and 400V reverse blocking voltage.

275V AC rated Metal Oxide Varistors for surge suppression, voltage transients, or back EMF suppression.

120 Ohm resistor and 0.1uF capacitor for back EMF suppression on AC loads

Two PTC fuses rated to 300mA at 20°C. Self resetting. Simple short circuit protection for 4-20mA loops and control gear.

Two PTC fuses rated to 3A at 20°C. Self resetting. Simple short circuit protection for control gear and power supplies.

Two aluminium electrolytic capacitors rated to 1000uF at 63V DC. General purpose use as noise suppression, supply filtering, and backup charge storage.

Dual 120 Ohm, 5%, 1W resistors for RS-485 bus termination or general purpose use

470 Ohm & 330 Ohm Resistive Divider, for stepping down a 24V DC supply to 10V. Useful as a feed voltage to a potentiometer for 0-10V control for VSD, etc.

Two 12 VDC Relay Card on DIN Rail Mount.

Dual channel relay card with flexible inputs. Each relay is rated to 7A at 240VAC, 10A at 28VDC. Operates from a 24VDC supply. DIN rail mount.

RJ45 to screw terminal card. Designed to enable easy connection of RS-485 modules to a MOSCAD ACE