United States en USD
  •  
     
TxRail USB Non Isolated DIN Mount 4-20mA/0-10V Module

TxRail USB Non Isolated DIN Mount 4-20mA/0-10V Module

SKU: SIG-0021

DIN rail mount signal conditioner takes thermocouples, Pt100 sensors or 0 to 50 mV in and outputs 4 to 20 mA and 0 to 10VDC. Programmable zero and span. 10 to 30 Vdc powered. 

Novus
  • Manufacturer: Novus
Buy more for less:
1-4items$73.08/ each 
5-9items$65.77/ eachsave10%
10or more items$62.12/ eachsave15%
  • $73.08
Qty:  
Available for backorder

TxRail-USB is an USB configurable DIN rail mount temperature transmitter. It allows selection and configuration of input type, measurement range, output type and calibration. Its output can be set to either loop powered 4-20mA or 0-10V. Highly accurate and user-friendly, the TxRail-USB performs well from simple to sophisticated measurement applications.

The input type, zero and span and output are configured using a USB cable and the free Windows TxConfigII software.

We can program the modules in small quantities for a small fee if you wish.

Features:

  • No electrical isolation between input and output. 
  • Internal protection against polarity inversion.
  • Cold junction compensation for thermocouples.
  • Configurable measurement range
  • Sensor break detection according to NAMUR Ne43 recommendations
  • Internal cold junction compensation
  • Output Linearized according with measured temperature
  • Free Windows® configuration software
  • USB micro-B port allows direct PC connection for configuration. USB Class CDC

Programming software comes with the TxRail units, but requires either a serial or USB programming cable. The latest version of the TXConfig software can also be downloaded directly from the Novus website.

    • SKU
      SIG-0021
    • Weight
      0.08 kg
    • Dimensions (L x W x H)
      10 x 8 x 10 cm

Power supply: 

  • Model 4-20 mA: 10 to 35 Vdc 
  • Model 0-10 Vdc: 12 to 35 Vdc 

Power supply influence: 0.006 % / V typical (percentage of the full measure range)

Programmable input: 

  • Thermocouples type J,K,T,N,E,R,S,B
  • Pt100, Pt1000 RTD (3-wire, excitation current 0.8 mA)
  • NTC 
  • 0 to 50 mV

Output: 

  • Model 4-20 mA: 4-20 mA or 20-4 mA current, 2-wired; linearized according to the selected sensor. 
  • Model 0-10 Vdc: 0-10 Vdc or 10-0 Vdc voltage, linear with respect to the measured temperature for the selected sensor. 

Output Resolution:

  • Model 4-20 mA: 2 µA
  • Model 0-10 Vdc: 0.0025 V (12 bits)

Accuracy (at 25 °C): Typical 0,1% of span for thermocouple, mV, Pt100 and Pt1000

Temperature Effect:

Response time: Typical 1.6 s

Maximum voltage allowed at input terminals no sensor: 3 V

Maximum load (RL): RL (max.) = (Vdc – 10) / 0.02 ohm: (Where: Vdc = Power supply voltage (10-35 Vdc))

Operating Temperature: -40 to 85 °C 

Operating humidity: 0 to 90 % RH 

Electromagnetic Compatibility: EN 61326-1:2006 

Connection Wire Cross Section: 0.14 a 1.5 mm² 

Screw Tightening: 0.8 Nm

Housing: ABS UL94-HB

Dimensions: 99.5 x 114 x 12.5 mm

Faulty Goods and Warranty

Where such goods have been supplied we undertake to repair or replace them as quickly as possible.Prior to returning faulty items, please contact us with a description of the fault as one of our engineers might be able to assist you by resolving the issue over the phone.
A Warranty form must be filled out and returned with any goods.

Our standard warranty period is 12 months from the date of purchase unless stated otherwise.

Other warranty periods:

Labjack Products: 5 Years
Atop Products: 3 Years
MeanWell Products: 3 Years
Terracom Products: 3 Years

Warranty is subject to us being satisfied that a defect was caused by defective workmanship or materials and was not caused by or was not substantially contributed to by other factors beyond our control including incorrect installation, alterations or modifications of the product not recommended by the manufacturer.

Returns Policy

If you are dissatisfied with our goods you may return them within 14 days of the dispatch date. Contact us for an authorisation and we will refund your purchase less shipping costs and restocking fees. All returned goods MUST be in AS NEW condition including ALL PACKAGING and DOCUMENTATION / MANUALS etc.

Please note:

  • The product returned will attract a 20% restocking fee.
  • The customer must pay the delivery costs.
  • Non standard, custom made or a specially manufactured or imported products are not returnable.
  • Semiconductors, books and software are not refundable

Full Terms and Conditions

By placing an order with Ocean Controls, you agree to be bound by our Terms and Conditions of Trade.

Related products

Customers who viewed this product also bought