Temperature & Humidity

Polyethylene dust cover for wall-mount and duct-mount relative humidity and temperature sensors.

Not compatible with RHT climates.

Replacement wick for the Wet/Dry bulb humidity psychrometers.

Sintered bronze dust cover for wall-mount and duct-mount relative humidity and temperature sensors.

Not compatible with RHT climates.

SS316 Stainless Steel Flange for Comeco RHB-1PV-S 4 to 20 mA Humidity Probe with Sintered Filter. 

Replacement sensor for Novus wall mount and duct mount temperature transmitters

Temperature ONLY

TERP-NTC10K3 sensors are wall mount temperature sensor fitted with NTC 10K thermistor

Latest sensor tip model RHT-35. Replacement sensor for Novus wall mount, duct mount humidity and temperature transmitters and controllers.

Please Note this sensor tip is ONLY compatible with devices that carry the SAME sensor tip. Please make sure your device has an identical sensor tip before ordering.

Replacement sensor tip for Novus RHT-Climate humidity and temperature transmitters.

Sensor tip model RHT-Climate products. 

Milesight EM300-TH is LoRaWAN-based temperature and humidity sensor. EM300-TH can be widely used for both indoor and outdoor application such as offices, greenhouses, etc

Milesight EM320-TH is LoRaWAN-based temperature and humidity sensor. EM320-TH can be widely used for both indoor and outdoor application such as offices, greenhouses, etc

TSH202 is an indoor digital humidity sensor, measuring also temperature. It provides a low cost option for humidity and temperature monitoring for home and industrial automation.

TSH206 is 1-wire, low cost option for humidity and temperature monitoring. The TSH206 is housed in a plastic box.

Panel mount temperature (-20 to 80degc) and Humidity (0 to 100% non condensing) sensor, linear 4-20mA output. Cable length 3 meters.

Panel mount Temperature (-20 to 80degc) and Humidity (0 to 100% non condensing) sensor, linear 0 to 10V output. Cable length 3 meters.

Panel mount temperature (-20 to 80degc) and humidity (0 to 100% non condensing) sensor with RS485 Modbus RTU output. Cable length 3 metres

Wall mount temperature and humidity sensor with linear 0 to 10V output.

Wall mount temperature and humidity sensor with Modbus RTU RS485 output.

Wall mount temperature (-20 to 80degc) and Humidity (0 to 100% non condensing) sensor, linear 4 to 20mA output. 

TSH300 is a precision temperature and humidity sensor with a Modbus RS-485 interface. The TSH300 is housed in a plastic box.

Loop powered probe for measuring the humidity of air or non-agressive gasses. 2 wire, 4 to 20 mA outputs signal

Loop powered probe for measuring the humidity of air or non-aggressive gasses. 2 wire, 4 to 20 mA outputs signal

The DCT device configuration tool is used for the configuration of the SyxthSense Room Solutions range.

RHR-BAC sensors are designed to detect relative humidity and temperature in the room spaces and have BACnet MS/TP communications.

NOT AVAILABLE FOR BACKORDER

RK330-02 Wall mountTemperature and Humidity Sensor with Display and 4 to 20 mA output. 12-24VDC Powered