Produal (Syxthsense)

CDR-AL-LCD-RH-2DO sensors and alarm units are designed to detect carbon dioxide concentration, humidity, temperature in the room spaces and provide alarm indication on high level of CO2 (green, amber and red LED). 

CDR-AL-LCD-DO sensors and alarm units are designed to detect carbon dioxide concentration, and temperature in the room spaces and provide alarm indication on high levels of CO2 (green, amber, and red LED).

MOD-2RM module converts a 0-10V DC analogue output signal to a raise-lower or stepped switching output. 

MOD-3RM module converts a 0-10V DC analogue output signal to a three stages of relay outputs or Fan/Cool/Heat sequenced output. 

MOD-4RM module converts a 0-10V DC analogue output signal to a 4 stage stepped switching output. 

D-SER is used with the BACnet and Modbus Plant Sensors to Configure the devices e.g. setting up the Modbus slave address or BACnet MAC Address. D-Ser is also used to adjust the calibration settings.

NOT AVAILABLE FOR BACKORDER

ILH-M transmitters are designed for detecting and controlling VOC (Volatile Organic Compound) level and temperature in dry room space. Modbus RTU connectivity

ILH-M-N transmitters are designed for detecting and controlling VOC (Volatile Organic Compound) level and temperature in dry room space. LCD display and Modbus RTU connectivity

ILH-M-RH transmitters are designed for detecting and controlling VOC (Volatile Organic Compound) level, temperature and humidity in dry room space. Modbus RTU connectivity

TRC-3A-MOD-24-AI Touchscreen Room Controller are attractive flush mounted Modbus RTU controllers with a large colour intuitive 3.5” touchscreen for viewing the system status and modifying the settings. Includes 2 x Analogue 0-10V Input Monitoring.

ML-SER commissioning tool is designed for easy commission and configuration of the HDH, TEHR and round transmitter products. The ML-SER shows device-specific configuration menus when the connector is plugged in the master device.

TRI-1R-BAC-24-W Touchscreen Room Controller are attractive flush mounted BACnet MS/TP controllers with a large colour intuitive 3.5” touchscreen for viewing the system status and modifying the settings.

KLK and KLHJ combined humidity and temperature transmitters detect duct air humidity by a capacitive element and temperature by the thermistor element. The linear output signals (humidity and temperature) can be configured to be either 0..10V or 4..20mA signal. High quality elements guarantee long stability and wide operating ranges for both humidity and temperature.

KLK and KLHJ combined humidity and temperature transmitters detect duct air humidity by a capacitive element and temperature by the thermistor element. The linear output signals (humidity and temperature) can be configured to be either 0..10V or 4..20mA signal. High quality elements guarantee long stability and wide operating ranges for both humidity and temperature.

RCD-BAC-LCD sensors are designed to detect carbon dioxide concentration and temperature in the room spaces and have BACnet MS/TP communications with a LCD screen

NOT AVAILABLE FOR BACKORDER

ILK transmitters are designed for measuring and controlling VOC (Volatile Organic Compound) level, temperature and humidity inside ventilation ducts. MEMS sensing technology ensures accurate and durable VOC measurement that is related to the CO₂ level. With the VOC level information the demand based ventilation can be controlled effectively.

TRC-H-2A3R-BAC Touchscreen Room Controller are attractive flush mounted BACnet MS/TP controllers with a large colour intuitive 3.5” touchscreen for viewing the system status and modifying the settings.

Din Rail Mount Relay Module with single 0-10Vdc Analog Input and Triple Interlocked Relays, adjustable Setpoints, 24VAC/DC power, contact rating 230VAC at 8A