Produal (Syxthsense)

TERP-NTC10K3 sensors are wall mount temperature sensor fitted with NTC 10K thermistor

MOD-2RM module converts a 0-10V DC analogue output signal to a raise-lower or stepped switching output. 

D-SER is used with the BACnet and Modbus Plant Sensors to Configure the devices e.g. setting up the Modbus slave address or BACnet MAC Address. D-Ser is also used to adjust the calibration settings.

NOT AVAILABLE FOR BACKORDER

MOD-3RM module converts a 0-10V DC analogue output signal to a three stages of relay outputs or Fan/Cool/Heat sequenced output. 

MOD-4RM module converts a 0-10V DC analogue output signal to a 4 stage stepped switching output. 

Din Rail Mount Relay Module with single 0-10Vdc Analog Input and Triple Interlocked Relays, adjustable Setpoints, 24VAC/DC power, contact rating 230VAC at 8A 

Multistage Modbus heating and cooling controller with DIN Rail mount. 3 analogue 0..10V outputs, 2 digital outputs, 1 external auto-detect sensor, 1 digital input, input for external NTC10 Temperature Sensor.

NOT AVAILABLE FOR BACKORDER

Multistage BACnet heating and cooling controller with DIN Rail mount. 3 analogue 0..10V outputs, 2 digital outputs, 1 external auto-detect sensor, 1 digital input, and input for external NTC10 Temperature Sensor.

NOT AVAILABLE FOR BACKORDER

BACnet I/O Module with Wall Mounting Enclosure. Ideal for remote zoning applications. 2 x volt-free digital inputs. 2 x 24Vac triac outputs. 24Vac power supply

The DCT device configuration tool is used for the configuration of the SyxthSense Room Solutions range.

Modbus RTU I/O Module with Wall Mounting Enclosure. Ideal for remote zoning applications.

RHR-BAC sensors are designed to detect relative humidity and temperature in the room spaces and have BACnet MS/TP communications.

NOT AVAILABLE FOR BACKORDER

LLR-BAC sensors have been designed to measure Light Level (LUX) in the room spaces. The LLR sensors also monitor for occupancy via infra-red detection.

NOT AVAILABLE FOR BACKORDER

LLR-MOD sensors have been designed to measure Light Level (LUX) in the room spaces. The LLR sensors also monitor for occupancy via infra-red detection.

NOT AVAILABLE FOR BACKORDER

IP54 Outdoor RTD Temperature Probe. Loop powered, 4 to 20 mA output with -50 to 50 ºC measurement range. Other temperature ranges selectable by switches. 

BACnet I/O Module with DIN Rail Mounting Enclosure. Ideal for remote zoning applications. 2 x volt-free digital inputs. 2 x 24Vac triac outputs. 24Vac power supply

TER-BAC sensors are designed to detect temperature in the room spaces and have BACnet MS/TP communications.

Modbus RTU I/O Module with DIN Rail Mounting Enclosure. Ideal for remote zoning applications.

BAC-IO9 is a BACnet I/O Module with Wall Mounting Enclosure. Ideal for remote zoning applications. 2 x resistive inputs (up to 65kOhm). 2 x volt-free digital inputs. 3 x 0..10Vdc analogue outputs. 2 x 24Vac triac outputs. 24Vac power supply.

BAC-IO9-AI is a BACnet I/O Module with Wall Mounting Enclosure. Ideal for remote zoning applications. 2 x analog inputs (0-10VDC). 2 x volt-free digital inputs. 3 x 0..10Vdc analogue outputs. 2 x 24Vac triac outputs. 24Vac power supply.

MOD-IO9 is a Modbus RTU I/O Module with Wall Mounting Enclosure. Ideal for remote zoning applications. 2 x resistive inputs (up to 65kOhm). 2 x volt-free digital inputs. 3 x 0..10Vdc analogue outputs. 2 x 24Vac triac outputs. 24Vac power supply.

MOD-IO9-AI is a Modbus RTU I/O Module with Wall Mounting Enclosure. Ideal for remote zoning applications. 

The SRC-200 series controllers have been designed for climate control of room spaces. Applications include Fan Coil Unit Control, Chilled Ceiling and Zone Heating Control, VAV applications and in Natural Ventilation applications.

CDRC sensors are designed to detect carbon dioxide concentration and temperature in the room spaces and have 4 to 20 mA outputs

NOT AVAILABLE FOR BACKORDER