DIN rail mount current transducer presents a 3 wire 4 to 20 mA DC signal representing the AC current flowing through a primary conductor. 0 to 200 A primary AC current range.

DIN rail mount current transducer presents a 3 wire 4 to 20 mA DC signal representing the AC current flowing through a primary conductor. 0 to 400 A primary AC current range.

DVP16SP11T expansion unit with 8 digital inputs and 8 Transistor outputs. Compatible with DVP-S Series PLCs and expansion modules.

A conveniently packaged Din rail mounted AC or DC voltage input to an adjustable 4-20mA output module. Designed for process control systems with “HAND / OFF / AUTO” applications.

UC100 is an IoT controller used for remote control and data acquisition from Modbus RS485 devices via LoRaWAN® networks. It can read up to 16 Modbus RTU registers and support Modbus transparent transmission between server and RS485 devices as a Modbus to LoRaWAN® converter.

Head mount signal conditioner for converting RTDs, thermocouples and voltage signals into a 4-20 mA current with a superimposed HART protocol for digital communication.

iEM-2331-L from Leadshine is a 3.1 N·m NEMA 23 stepper motor with integrated driver. Standard pulse and direction (or CW/CCW) input. Advanced anti-resonance DSP driver.

ESM-4420 from Emko Elektronik is a PID Temperature Controller with auto tuning PID 230 VAC powered. Input accepts thermocouples J, K,R,S, T and Pt100 sensors. Pulse and 2 Relay outputs

New LABJACK T8 Multifunction DAQ with 8 Isolated Analog Inputs, 2 Analog Out, 20 x Digital I/O, Ethernet (POE) and USB

RCD-BAC-LCD sensors are designed to detect carbon dioxide concentration and temperature in the room spaces and have BACnet MS/TP communications with a LCD screen

NOT AVAILABLE FOR BACKORDER

Multifunctional Programmable Timer and Counter with RS 232/485 Serial Communication Unit. Can configure it to be a Counter, Totalizer Counter, Batch Counter, Timer, Chronometer, Frequencymeter and Tachometer. Modbus RTU communications. 

iEM-2435 from Leadshine is a 3.5 N·m NEMA 24 stepper motor with integrated driver. Standard pulse and direction (or CW/CCW) input. Advanced anti-resonance DSP driver.

BRT 4-20MA-GEL is a DC 4-20mA Generator with 0-100% Percentage LED Display. Fitted with a panel-mounted Grey Knob to adjust the 4-20mA output level.

BRT 420LGPM  is a 2-wire DC 4-20mA Generator with 4-20mA or 0-100% Percentage LCD Display. Fitted with a panel-mounted Grey Knob to adjust the 4-20mA output level.

ILK transmitters are designed for measuring and controlling VOC (Volatile Organic Compound) level, temperature and humidity inside ventilation ducts. MEMS sensing technology ensures accurate and durable VOC measurement that is related to the CO₂ level. With the VOC level information the demand based ventilation can be controlled effectively.

BRT VIG-D2 is a DC 4-20mA Generator with 4-20mA or 0-100% Percentage LED Display. Fitted with a panel-mounted Knob to adjust the 4-20mA output level. Modbus RTU connectivity

iEM-2323 from Leadshine is a 2.3 N·m NEMA 23 stepper motor with integrated driver. Standard pulse and direction (or CW/CCW) input. Advanced anti-resonance DSP driver.

iEM-RS Series is an integrated stepper motor with drive, and based on standard Modbus RTU protocol. Using RS485 communication it can network up to 31 axes. Its built-in PR feature with 16-segment position table (PR Mode) can save additional controllers in most of point-to-point applications, to greatly enhance system reliability and reduce the cost

iCS series is integrated closed-loop stepper motor with 14-bit single-turn absolute encoder for smooth and jitter-free motor start-up. iCS-2435 from Leadshine is a 3.5 N·m NEMA 24 stepper motor with integrated driver. Standard pulse and direction (or CW/CCW) input. 

12 VDC powered weekly timer with 8 programs and 16 A SPDT relay

24AC/DC powered weekly timer with 8 programs and 16 A SPDT relay

230VAC powered weekly timer with 8 programs and 16 A SPDT relay

Leadshine Gear Box 10:1 for NEMA 24 (60mm) stepper motor with 8mm shaft dia

Leadshine Gear Box 10:1 for NEMA 34 (86mm) stepper motor with 12.7mm shaft dia