LabJack

Plugs directly into the bottom of a LabJack - U12 via the DB25 connector. The card doesn't come with relays loaded, it is a bare PCB that will accept either 16 miniature style relays or 8 standard size relays.

Is designed to plug directly into the bottom of a U3/U6/U9/T7 series via the DB15 connector, using the 12 EIO/CIO lines to control up to 12 I/O modules. Output or input types of digital I/O modules can be used. The card doesn't come with relays loaded, it is a bare PCB that will accept either 16 miniature style relays or 8 standard size relays.

Dual high input impedance buffer for analog signals. Plugs directly into the standard screw terminal block found on newer U3/U6/UE9/T4/T7 Labjack Data Acquisition modules.

LabJack U6 Data Acquisition OEM Card.

OEM Card Version of LABJACK T7 Multifunction DAQ with Ethernet and USB.

A signal conditioning module that divides 2 single-ended unipolar channels of 0 to 10 V analog signals down to 0 to 2.0 V signals.

DIN rail mount clip for LabJack U3/U6/UE9/T4/T7.

The LJTick-Resistance (LJT-Rx) makes it easy for LabJack devices to measure resistive sensors.

The LJTick-Resistance (LJT-Rx) makes it easy for LabJack devices to measure resistive sensors.

The LJTick-Resistance (LJT-Rx) makes it easy for LabJack devices to measure resistive sensors.

The LJTick-OutBuff (LJTIB) is an output buffer tick that increases the output current of the DAC outputs on LabJack devices. Plugs directly into the standard screw terminal block found on newer U3/U6/UE9/T4/T7.

The T4 is a USB or Ethernet multi function DAQ device with up to 12 analogue inputs or 16 digital I/O, 2 analog outputs (10-bit), and multiple digital counters/timers

The LJTick-VRef is a Voltage reference accessory that outputs a stable 2.5V signal. Can be used with the Labjack U3, U6, UE9, T4 and T7 data acquisition modules

The LJTick-VRef is a Voltage reference accessory that outputs a stable 4.096V signal. Can be used with the Labjack U3, U6, UE9, T4 and T7 data acquisition modules

The T4-OEM is a USB or Ethernet multifunction DAQ device with up to 12 analogue inputs or 16 digital I/O, 2 analog outputs (10-bit), and multiple digital counters/timers

Converts 3.3V digital outputs to 5V digital outputs on a U3, U6, UE9, T4 and T7 Labjack DAQ modules . Easily control 5V relays, or interface with a 5V logic device.

EI-1022 is a plastic temperature probe, with a linear output of 10 mV per degree K. Operating temperature range from -40 to +100 °C.

OEM Card Version of LABJACK T7 Pro Multifunction DAQ with Ethernet and USB.

A signal conditioning module that divides 2 single-ended uni-polar channels of 0 to 25 V analog signals down to 0 to 2.5 V signals. V_output = V_input/4 

New LABJACK T8 Multifunction DAQ with 8 Isolated Analog Inputs, 2 Analog Out, 20 x Digital I/O, Ethernet (POE) and USB