Foxtam Controls

Slim isolated selectable analog input signals with selectable single analog output. It features on-board DIP switches that enable the user to select their preferred input/output signal.

Slim isolated signal converter with dual output converts a single, selectable analog input signal to dual analog outputs. The input signal type and each output signal type can be configured with on-board DIP switches.

SMH-TC 12VDC Signal Line Surge Arrester. Suitable for 0-10 V signals.

LAST UNITS!!
No Backorders available.

These double channel surge arresters are designed to protect all DC “floating” analogue signal lines both voltage and mA, including TTL levels and PT100 signals.

LAST UNITS!!
No Backorders available.

These units are designed to protect small 48VDC (optional 12 and 24VDC) floating power supplies and systems and are wired in series,maximum system load 4 Amps

LAST UNITS!!
No Backorders available.

The MOD-W-1 is a DIN Rail mount liquid level control relay. It features adjustable sensitivity and time delay from 0.1 to 10 sec. SPCO output with selectable pump up or pump down modes as well as relay proving function.

The MOD-W-1 is a DIN Rail mount liquid level control relay powered from 24 VAC. It features adjustable sensitivity and time delay from 0.1 to 10 sec. SPCO output with selectable pump up or pump down modes as well as relay proving function.

The MOD-W-1 is a DIN Rail mount liquid level control relay powered from 24 VDC. It features adjustable sensitivity and time delay from 0.1 to 10 sec. SPCO output with selectable pump up or pump down modes as well as relay proving function.

DIN rail mount, SPCO contact type power relays have tri-voltage relay coil of 24 VAC/DC, 110 VAC, 230 VAC with 16 A maximum switching current @ 250 VAC.

DIN rail mount, 3PCO contact type power relays have tri-voltage relay coil of 24 VAC/DC, 110 VAC, 230 VAC with 16 A maximum switching current @ 250 VAC.

A high-quality range of CE-marked standard pin-out 4PCO 14-pin plug-in relays, nominally rated at 5 Amps/250VAC AC1. The relays benefit from every customer-required option as standard, namely both mechanical and electrical indication via a mechanical flag and a high-intensity LED. DC coil relays also have included within the relay a protection diode fitted across the coil as standard.
The relay comes with a PYF-14BE base.

DIN rail mount, multi-voltage range from 12 to 250 VAC/DC changeover (SPCO) latching relay, 16 A maximum switching current. Separate toggle, set and reset inputs.

DIN rail mount, multi-voltage range from 12 to 250 VAC/DC changeover (DPCO) latching relay, 16 A maximum switching current. Separate toggle, set and reset inputs.

Programmable latching and sequence relay. The outputs are four individual single pole normally open contacts. The unit is programmed via three front selector switches.

6mm wide complete package of socket and relay combined, the base features an integral LED indicator and a relay retaining clip. SPCO contact rated 6 Amps / 250VAC AC1

6 mm wide complete package of socket and relay combined, the base features an integral LED indicator and a relay retaining clip. SPCO contact rated 6 A / 250 VAC AC1

6 mm wide complete package of socket and relay combined, the base features an integral LED indicator and a relay retaining clip. SPCO contact rated 6 A / 250 VAC AC1

6mm wide complete package of socket and relay combined, the base features an integral LED indicator and a relay retaining clip. SPCO contact rated 6 Amps / 250VAC AC1

41F-20 is a 20 Way Jumper Bar to suit 6mm Relay

41F-TAG sheet of 16 Marker tabs for 41F series 6mm Relays

18mm - DIN Rail mount, multi-function timer-relay with SPCO output, dual LEDs indication. Multiple time range 0.1 s to 10 days. 24 to 240 VAC/VDC powered.

New Updated Version of NTR-101

DIN-rail mount, multi-function timer with 4PCO relay output rated at 8 A/ 250 VAC. 12 to 240 VAC or VDC powered. Eight selectable timing modes and an adjustable time period from 0.1 second to 10 days.

DIN-rail mount cyclic timer with configurable on and off times. Features selectable "pulse first" or "pause first" for initial timing function. 4PCO relay output, selectable multi-time range from 1 s to 100 days.

This DIN rail mount timer is capable of switching a large load with 5 selectable pre-programmed time ranges from 1 day to 1 month. 4PCO heavy duty relay contacts. 12 to 250 VAC/DC powered.