Novus

Panel mount thermostat with included NTC sensor on 2 m lead. Configurable for a huge range of heating and cooling applications. 12 to 30V AC/DC powered.

CET-004 is replaced with CET-0041 which has RS485

Panel mount thermostat for Pt100 sensors. Configurable for a huge range of heating and cooling applications. 100 to 240 VAC powered.

Panel mount thermostat for J, K or T type thermocouple sensors. Configurable for a huge range of heating and cooling applications. 100 to 240 VAC powered.

Panel mount temperature & relative humidity controller with sensor probe on 3 meters of cable. 2 independent relay outputs. 12 to 30 VAC or DC powered.

Wall mount temperature and humidity sensor, linear 4 to 20 mA output.

RHT-DM Duct Temp & Humidity Sensors 4-20 mA 150 mm

RHT-DM Duct Temp & Humidity Sensors 4-20 mA 250 mm

RHT-WM Wall Mount Modbus Temperature and Humidity Transmitter with LCD Display

Duct-mount temperature and humidity sensor with RS-485 Modbus transmitter. 150 mm long probe with adjustable flange easily mounts on rectangular ducts.

Duct-mount temperature and humidity sensor with RS-485 Modbus transmitter. 250 mm long probe with adjustable flange easily mounts on rectangular ducts.

NO BACKORDER UNTIL FURTHER NOTICE. 

Temp-WM Temperature Sensors 4-20mA output

Temp-DM Duct Temperature Sensors 4-20 mA 150 mm

NOT AVAILABLE FOR BACKORDER

Temp-DM Duct Temperature Sensors 4-20mA 250mm

NOT AVAILABLE FOR BACKORDER

Sintered bronze dust cover for wall-mount and duct-mount relative humidity and temperature sensors.

Not compatible with RHT climates.

Head mount signal conditioner takes thermocouples, Pt100 sensors or 0 to 50 mV in and outputs 4 to 20 mA. Programmable zero and span via micro USB interface. Loop powered. 

The TxConfig USB is the configuration interface to configure the whole NOVUS Smart Transmitters family such as TxRail, TxIsoRail, RHT sensors 

Fully isolated DIN rail mount signal conditioner takes thermocouples, Pt100 sensors, 0 to 50 mV or 0 to 10 V in and outputs 4 to 20 mA. Programmable zero and span. Loop powered.

Fully isolated DIN rail mount signal conditioner takes thermocouples, Pt100 sensors, 0 to 50 mV, 0 to 20 mA or 4 to 20 mA in and outputs 0 to 10 V. Programmable zero and span.

The Novus DigiRail 2A accepts thermocouples, Pt100 sensors, millivolts up to 50 mV, voltage up to 10 V or current up to 20 mA with programmable linearisation and engineering units. Fully isolated. Outputs Modbus RTU over RS-485.

The Novus DigiRail 4C is a quad input counter and digital input module. Counts at up to 100 kHz (input 1 only), with 32-bit counting registers. Outputs Modbus RTU over RS-485.

Digirail Modbus Module 2 Relay Outputs

TxIsoloop-1 Single Loop Isolator

TxIsoloop-2 Dual Loop Isolator

6 digit up/down/quadrature/add/subtract counter with batch and totaliser functions. 1 SPST relay and 1 5 V pulse output. 240 V powered