Non-isolated Converters

Non-isolated Voltage signal to 4-20mA signal converter. Convert any voltage signal from 0 to 30V or 0 to 60V to 4-20mA. full scale of the input signal needs to be below 2.3V or above 4.9V. The two trimpots and the switch at the top allow the user to easily configure the voltage range to be converted.

DIN rail mount signal conditioner takes thermocouples, Pt100 sensors or 0 to 50 mV in and outputs 4 to 20 mA and 0 to 10VDC. Programmable zero and span. 10 to 30 Vdc powered. 

TxMiniBlock is a cost-effective programmable RTD temperature transmitter for head mounting. With a unique microprocessor based technology it features full PC configuration of range and calibration. 4-20mA loop powered

The TxMini-M12-RS485-CN is a Pt100 sensors with a RS485 Modbus RTU output. It's ideal to be used in places with space restrictions. M12 connector and terminal connections for PT100.

The TxMini-M12 is a 4-20mA transmitter for Pt100 or Pt1000 sensors. It's ideal to be used in places with space restrictions. M12 connector.

The TxMini-M12 is a 4-20mA transmitter for Pt100 or Pt1000 sensors. It's ideal to be used in places with space restrictions. DIN-43650 connector.

The TxMini is a 4-20 mA transmitter for Pt100 or Pt1000 sensors. It's ideal to be used in places with space restrictions. PCB solder tabs for connection.

USB programming cable for Novus TxMini-M12 signal conditioners.

The TxConfig USB is the configuration interface to configure the whole NOVUS Smart Transmitters family such as TxRail, TxIsoRail, RHT sensors 

Txconfig USB programming cable with DIN43650 interface for configuring Novus NP620 pressure sensors.

Head mount signal conditioner takes thermocouples, Pt100 sensors or 0 to 50 mV in and outputs 4 to 20 mA. Programmable zero and span via micro USB interface. Loop powered. 

TT-500 is a non isolated 0-10VDC hockey puck head mounted Temperature transmitter. It accepts all kinds of thermocouple and PT100 RTD inputs and coverts them into an analog 0-10VDC signal. 

TT-311 is a galvanically isolated 4-20mA DIN Rail mounted Temperature transmitter. It accepts all kinds of thermocouple and PT100 RTD inputs and coverts them into an analog 4-20mA signal. 

TT-216 is a galvanically isolated 4-20mA hockey puck head mounted Temperature transmitter. It accepts all kinds of thermocouple and PT100 RTD inputs and coverts them into an analog 4-20mA signal. This head mount temperature transmitter is a two wire loop powered transmitter

TT-210 is a non isolated 4-20mA hockey puck head mounted Temperature transmitter. It accepts all kinds of thermocouple and PT100 RTD inputs and coverts them into an analog 4-20mA signal. This head mount temperature transmitter is a two wire loop powered transmitter

Programming kit for TT-311 DIN Rail mount isolated signal convertor 

The V5 Programming cable for Maxwell Head Mount Transmitters TT-210,TT-500, TT-216 

The SPT-61 signal converter is equipped with Pt 100 / Pt 500 / Pt 1000 type input, 4-20mA output. Loop powered.

Tiny signal conditioner for potentiometers. Provides 2.5 V excitation. 3-wire 0 to 10 V output.

No available for backorder

Mini Size 0-5A AC RMS Current to 4-20mA Transmitter

No available for backorder

Mini Size 0-5A AC RMS Current to 0-10VDC Transmitter

No available for backorder

Head mount signal conditioner takes thermocouples, Pt100 sensors, and outputs 4 to 20 mA. Programmable zero and span via keypad. Loop powered.

No available for backorder

Dual 250 Ohm, 0.1%, 1W resistors, suitable for converting 4 to 20 mA loops to 1 to 5V.

Dual 500 Ohm, 0.1%, 1W resistors, suitable for converting 4 to 20 mA loops to 2 to 10V