Comeco

Wet/Dry dual Pt100 thermometer module with 4 to 20 mA outputs for high accuracy relative humidity measurement, or humidity measurement in high temperature or constantly wet environments.

3-Digit programmable flow alarm with display capable of switching from 0.5 to 20 l/min. NPN alarm output.

3-Digit programmable flow alarm with display capable of switching from 0.5 to 20 l/min. NPN alarm output and TTL Pulse Output.

Three wire 4 to 20 mA sensor detects carbon dioxide concentration from 0 to 3000 ppm.

Programmable indicator with universal input and 32 mm LED display. Great visibility from a distance. 1 × relay output for alarms or ON/OFF control. 12 to 24 VAC/DC power supply

Programmable indicator with universal input and 45 mm LED display. Great visibility from a distance. 1 × relay and 1 × SSR pulse output for alarms or ON/OFF control.

Wet/Dry dual Pt100 thermometer module for high accuracy relative humidity measurement, or humidity measurement in high temperature or constantly wet environments.

This simple and reliable paddle flow switch operates in both flow directions, comes with IP65 rated housing. For liquids up to 140 °C.

Combination 6 digit up/down counter and 6 digit rate meter. Counter has batch and totaliser functions. Rate meter has RPM, frequency, period and flow modes. One relay output. 12-24VDC powered.

Universal linear input, DIN rail mount programmable tri-colour LED bar graph unit with one relay outputs. Programmable 3 digit display. 12 to 24 VDC/AC powered.

DIN rail mount programmable trip-alarm unit with two relay outputs. Programmable 3 digit display. 12 to 24 VDC/AC powered.

Ceramic K type thermocouple rated to 1200°C.

K Thermocouple probe with magnet fixing for surface temperature measurement. 0 to 350 ºC

Configurable in-loop LCD display of process variables in IP-65 box. Scale and offset setting allow the value to be displayed in appropriate engineering units.

The TC10 Remote Set point unit allows you to produce a defined current in the 0-10VDC range. Front scale reads 0-100%. 12-24VDC Powered

The TC10 Remote Set point unit allows you to produce a defined current in the 4-20 mA range. Front scale reads 0-100%. 12-24VDC Powered

DIN rail mount programmable on-off controller for RTD, PTC, NTC, thermocouples, voltage or current temperature sensors. Two changeover relay outputs. 12-24 VAC/DC powered.

Panel mount programmable on-off controller for RTD, PTC, NTC, thermocouples, voltage or current temperature sensors. Two changeover relay outputs. 12-24 VAC/DC powered.

Loop powered probe for measuring the humidity of air or non-aggressive gasses. 2 wire, 4 to 20 mA outputs signal

Loop powered probe for measuring the humidity of air or non-agressive gasses. 2 wire, 4 to 20 mA outputs signal

IP66 rated temperature sensor. Loop powered, 4 to 20 mA output with -20 to 60 ºC measurement range. Aluminium and stainless steel for long life outdoors.

RPM Controller for 1-phase AC Motors up to 500VA. The SCRM1 is rated at 230 VAC with a current of 0.5 - 5 A.

Configurable, 96×48 mm in-loop LED display of process variables. Scale and offset setting allow the value to be displayed in appropriate engineering units.

Configurable, 96 × 48 mm in-loop LCD display of process variables. Scale and offset setting allow the value to be displayed in appropriate engineering units.