‍Clearance

Simple panel mount display takes a 0 to ±1.999 VDC signal in and displays the value from -1999 to 1999 with configurable decimal point. 5 VDC powered.

AM882 fully digital microstepping stepper motor driver with anti-resonance tuning and sensorless stall detection. Automatic or computer-driven tuning. Suits large stepper motors up to 8.2 A.

DM432 fully digital microstepping stepper motor driver with anti-resonance tuning. Automatic or computer-driven tuning. Suits medium-sized stepper motors up to 3.2 A.

DIN rail mount battery monitor and test unit for 24 V systems. Sits between the battery and charger / load and provides contacts for DC bus good, battery fail and battery low signals out. On Special the DR-UPS40 is now being replaced by newer models DUPS20 and DUPS40

Selectable digital gain at values of 1, 10, 100 and 1000. Four TTL or CMOS-compatible address lines individually selects the amplifier gains.

Dual output isolated 4 to 20 mA transmitter (4 to 20 mA input and two 4 to 20 mA outputs.) Easy to install with analog span and zero controls.

5 Digit LCD programmable process indicator with internal battery and 0 to 5 VDC signal input. Suits cutout 24 × 48 mm.

On Clearance Split core hall effect current transducer presents a 4 to 20mA DC signal representing the AC current flowing through a primary conductor. 0 to 200A primary AC current range.

Clearance Item IP65 sealed temperature logger for monitoring temperatures of products during transportation. NFC wireless interface and Windows software for configuration, download and charting.

CC2_Locky_TTL/USB. Programming Cable for Locky RFID controller.

Key Fob for Teracom RFID controllers.

Locky-BF is a stand alone RFID access controller. It works with 125 kHz, EM4102 compatible, tags. It utilises main parts of access control system – reading antenna, microprocessor and output relay. The status of the device alternates on every valid tag approach.

Locky-BT is a stand alone RFID access controller. It works with 125 kHz, EM4102 compatible, tags. It utilises main parts of access control system – reading antenna, microprocessor and output relay. The ID number of every approached tag is sent through the asynchronous serial interface.

125 kHz RFID Iso Card.

TSG200 is a 1-Wire carbon dioxide sensor with 10000ppm working range and IP30 protection.