LabJack

Short, 37 pin cable suits the expansion plug on the LabJack U6, U6-Pro, UE9 and UE9-Pro.

Provides convenient screw terminal access to 12 digital I/O available on a DB15 connector.

Screw terminal connections, with short-circuit and overvoltage protection, for the extra 16 digital I/O on the LabJack U12.

Plugs directly into the bottom of a LabJack U6, UE9 or T7 to give screw terminal access to extra IO signals.

EI-1022 is a plastic temperature probe, with a linear output of 10 mV per degree K. Operating temperature range from -40 to +100 °C.

DIN rail mount clip for LabJack U3/U6/UE9/T4/T7.

The T4 is a USB or Ethernet multi function DAQ device with up to 12 analogue inputs or 16 digital I/O, 2 analog outputs (10-bit), and multiple digital counters/timers

The T4-OEM is a USB or Ethernet multifunction DAQ device with up to 12 analogue inputs or 16 digital I/O, 2 analog outputs (10-bit), and multiple digital counters/timers

LABJACK T7 Multifunction DAQ with Ethernet and USB

OEM Card Version of LABJACK T7 Multifunction DAQ with Ethernet and USB.

T7 Pro has all the features of the multi-function DAQ T7 (Ethernet & USB interface, 100 kS/s) plus Wi-Fi & 24-bit ADC.

OEM Card Version of LABJACK T7 Pro Multifunction DAQ with Ethernet and USB.

New LABJACK T8 Multifunction DAQ with 8 Isolated Analog Inputs, 2 Analog Out, 20 x Digital I/O, Ethernet (POE) and USB

The LabJack U12 is the simplest member of the family, with 12 analog inputs (12 bit ±10 VDC, programmable gain amplifier), 20 digital IO, 2 voltage outputs and USB interface.

The most economical member of the LabJack family, the U3-HV has 12 flexible I/O (digital input, digital output, 12 bit 0 to 3.6 VDC analog input), 4 HV analog inputs (12 bit -10 to 20 VDC), 2 voltage outputs and USB interface.

OEM version of the Labjack U3-HV. Most through-hole components (USB and DB15 connector, screw terminals etc) are not installed, making the U3-OEM very flexible. See the U3 User's Guide for more information. Ships with the board only. All documentation, drivers, and examples are available online. DAQFactory Express is not included.

The most economical member of the LabJack family, the U3-LV has 16 flexible I/O (digital input, digital output, 12 bit 0 to 3.6 VDC analog input), 2 voltage outputs and USB interface.

OEM version of the Labjack U3-LV. Most through-hole components are not installed, making the U3-OEM very flexible.

LabJack U6 USB IO module with 14 analog inputs (up to 16 bit resolution), 2 analog outputs and 20 digital IO.

LabJack U6 Data Acquisition OEM Card.

LabJack U6-Pro USB IO module with 14 analog inputs (up to 22 bit resolution), 2 analog outputs and 20 digital IO.

The LJTick-VRef is a Voltage reference accessory that outputs a stable 2.5V signal. Can be used with the Labjack U3, U6, UE9, T4 and T7 data acquisition modules

The LJTick-VRef is a Voltage reference accessory that outputs a stable 4.096V signal. Can be used with the Labjack U3, U6, UE9, T4 and T7 data acquisition modules

A signal conditioning module designed to convert two 4 to 20 mA current loop signals into voltage signals that vary from 0.472 to 2.360 V.