Leadshine

New - the EM882S from Leadshine is able to power 2 phase (1.8deg) and 4 phase (0.9deg) stepper motors smoothly with very low motor heating & noise. It can take 20-80VDC supply voltage and output 2.1 to 8.2A (5.86A RMS) current.

The DMA882S is a digital stepper drive with simple design and easy setup. Operating voltage of 20-80VAC or 30-110VDC and it can output up to 8.2A current making it suitable for NEMA 23, 24, 34 and 42 stepper motors

Single shaft NEMA 24, 2 phase bipolar stepper motor with 3.0 N.m of holding torque. Rated at 5 A phase current, weighing 1.3 kg with 85 mm body length and 8 mm shaft diameter.

Part of Leadshine's latest EM-CAN series the EMA882-CAN is a stepper motor drive with CANopen communication bus supporting standard CiA 301/402 protocol, and compatible with most popular CANopen master controllers available on the current market. 20 to 80 VDC powered with output current up to 8.2 A peak.

The ZTC-020 is the aprropriate communication device (sold separately) for this driver.

The iSV-B23130-01 integrated servo motor is a NEMA 23 brushless DC servo motor integrated with a 1,000-line (4,000 PPR) encoder and a DSP-based servo drive. 

The iSV-B23180 integrated servo motor is a NEMA 23 brushless DC servo motor integrated with a 1,000-line (4,000 PPR) encoder and a DSP-based servo drive. 

Single shaft NEMA 34 frame size bipolar stepper motor with 87 kg·cm (8.5 Nm) holding torque.

12.0 N·m, 3 Phase NEMA 42 closed loop stepper motor with 1,000 line encoder for feedback. Rated at 4.2 A phase current, weighing 2.7 kg with 161 mm body length and 19 mm shaft diameter.

20.0 N·m, 3 Phase NEMA 42 closed loop stepper motor with 1,000 line encoder for feedback. Rated at 5.2 A phase current, weighing 4.0 kg with 161 mm body length and 19 mm shaft diameter.

Closed-loop stepper motor driver with encoder feedback input. Suits medium to large-sized, 3 phase stepper motors up to 6.0 A, operating at 150-230 VAC.

Leadshine ELDM6060V48HL-A5 600 W brushless AC servo motor with 1000 line encoder.

Leadshine ELDM8075V48HM-A4 750 W brushless AC servo motor with 1000 line encoder.

Leadshine ELDM80100V48HM-A4 1000 W brushless AC servo motor with 1000 line encoder.

The ELD2-RS7030 brushless servo drive, power range from 25W to 1200W, are special DC input, motion control product designed for machines and applications that request a best balance between reasonable cost and outstanding performance with MFC/vibration suppression.

The ELD2-RS7020 brushless servo drive, power range from 25W to 750W, are special DC input, motion control product designed for machines and applications that request a best balance between reasonable cost and outstanding performance with MFC/vibration suppression.

CS-M22326 is a  2.6 N·m, 2 Phase NEMA 23 closed loop stepper motor with 1,000 line encoder for feedback. Rated at 5.0 A phase current, weighing 1.3 kg with 104 mm body length and 8.0 mm shaft diameter.

3.0 N·m, 2 Phase NEMA 24 closed loop stepper motor with 1,000 line encoder for feedback. Rated at 5.0 A phase current, weighing 1.5 kg with 107 mm body length and 8.0 mm shaft diameter.

4.5 N·m, 2 Phase NEMA 34 closed loop stepper motor with 1,000 line encoder for feedback. Rated at 6.0 A phase current, weighing 1.5 kg with 109 mm body length and 14.0 mm shaft diameter.

8.5 N·m, 2 Phase NEMA 34 closed loop stepper motor with 1,000 line encoder for feedback. Rated at 6.0 A phase current, weighing 4.0 kg with 147 mm body length and 14.0 mm shaft diameter.

12.0 N·m, 2 Phase NEMA 34 closed loop stepper motor with 1,000 line encoder for feedback. Rated at 6.0 A phase current, weighing 4.7 kg with 158 mm body length and 14.0 mm shaft diameter.

Closed-loop stepper motor driver with encoder feedback input and encoder A/B/Z outputs. Operating at 20-50VDC, max 3A output current. Suits 2 phase CS Series Closed Loop Stepper Motors.

Closed-loop stepper motor driver with encoder feedback input and encoder A/B/Z outputs. Operating at 20-50VDC, max 7A output current. Suits 2 phase CS Series Closed Loop Stepper Motors.

The CS-M22313 is a 1.3 N·m, 2 Phase NEMA 23 closed loop stepper motor with 1,000 line encoder for feedback. Rated at 4.0 A phase current, weighing 0.9 kg with 75 mm body length and 8.0 mm shaft diameter.

CS-M21708 is a 0.8 N·m, 2 Phase NEMA 17 closed loop stepper motor with 1,000 line encoder for feedback. Rated at 2.5 A phase current, weighing 0.75 kg with 83 mm body length and 5.0 mm shaft diameter.