- Clearance
- Arduino
- CNC
- Communications
- Computer Products
- Controllers
- Data Acquisition
- Data Loggers
- Electrical Switches
- Electrical Terminals-Wiring
- Enclosures
- Industrial IoT
- Large Displays
- Lighting
- Modbus-Bacnet-MBus Products
- Motor Drivers & Controllers
- Motors & Accessories
- Panel Meters
- PLCs & HMIs
- Power Supplies
- Prototyping
- Relays & Relay Cards
- Security
- Sensors
- 1 Wire
- Accelerometers
- Capacitive Proximity
- Chemical
- Compass
- Current-Voltage
- Float Switches
- Flow
- Gas
- Hall Effect
- Inclinometers
- Inductive Proximity
- Length & Distance
- Light & Colour
- Limit & Foot Switches
- Liquid Level
- Load Cells
- PhotoElectric Switches
- Pressure Transducers
- Smartphone Based
- Temperature RTD and T/C
- Temperature Other
- Temperature & Humidity
- Ultrasonic
- VOC - Air Quality
- Signal Conditioners
- Software
- Test Equipment
- Timers
- Weather
Leadshine
Sort by:Recommended
CABLEM-RZ3M0 Motor Extension Cable 3 meters for Closed Loop Stepper Motor
SKU:LSK-040CABLEM-RZ3M0 Motor Extension Cable 3 meters for Closed Loop Stepper Motor - with MOLEX CONNECTOR For CS1 and CS3E drives
CABLEM-RZ5M0 Motor Extension Cable 5 meters for Closed Loop Stepper Motor
SKU:LSK-041CABLEM-RZ5M0 Motor Extension Cable 5 meters for Closed Loop Stepper Motor - with MOLEX CONNECTOR For CS1 and CS3E drives
CABLEM-RZ10M0 Motor Extension Cable 10 meters for Closed Loop Stepper Motor
SKU:LSK-043CABLEM-RZ10M0 Motor Extension Cable 10 meters for Closed Loop Stepper Motor - with MOLEX CONNECTOR For CS1 and CS3E drives
CABLEM-BM3M0 Encoder Extension Cable 3 meters for Closed Loop Stepper Motor
SKU:LSK-050CABLEM-BM3M0 Encoder Extension Cable 3 meters for Closed Loop Stepper Motor - with MOLEX CONNECTOR. For CS1 and CS3E drives
CABLEM-BM5M0 Encoder Extension Cable 5 meters for Closed Loop Stepper Motor
SKU:LSK-051CABLEM-BM5M0 Encoder Extension Cable 5 meters for Closed Loop Stepper Motor - with MOLEX CONNECTOR. For CS1 and CS3E drives
CABLEM-BM10M0 Encoder Extension Cable 10 meters for Closed Loop Stepper Motor
SKU:LSK-053CABLEM-BM10M0 Encoder Extension Cable 10 meters for Closed Loop Stepper Motor - with MOLEX CONNECTOR. For CS1 and CS3E drives
3.0 Metre Power Extension Cable for ELDM servo motor with aviation connector
SKU:LSK-035Power cable for ELDM servo motors aviation connector.
CS-D808 8A 2 Phase CS Series Closed Loop Stepper Drive
SKU:SMC-163Leadshine CS-D808 is a stepper motor driver with encoder feedback input. Operating at 30-80VDC, max 8A output current. Suits 2 phase CS Series Closed Loop Stepper Motors.
4.5 N.m 2 Phase NEMA 34 CS Series Closed-Loop Stepper Motor IP65
SKU:MOT-166W4.5 N·m, 2 Phase NEMA 34 closed loop stepper motor with 1,000 line encoder for feedback. Rated at 6.0 A phase current, weighing 1.5 kg with 109 mm body length and 14.0 mm shaft diameter. Has an IP65 environment rating
2.3 N.m 2 Phase NEMA 23 CS Series Closed-Loop Stepper Motor IP65
SKU:MOT-160WThe CS-M22323WP is 2.3 N·m, 2 Phase NEMA 23 closed loop stepper motor with 1,000 line encoder for feedback. Rated at 5.0 A phase current, weighing 1.3 kg with 96 mm body length and 8 mm shaft diameter. IP65 Rating
2.3 N.m NEMA 23 Open-Loop Stepper Motor IP65
SKU:MOT-125WSingle shaft NEMA 23 frame size bipolar stepper motor with 2.3 N.m (326 oz-in) holding torque. IP65 rating
1 Meter RS485 Bus Cable for ELD2 Drives
SKU:LSK-033RS485 cable CABLE-TX1M0-LD2 with MOLEX CONNECTOR for ELD2-RS drives
PS806-12 Single Output Linear Power Supply: 68 VDC Output
SKU:SMP-068PS806-12 Linear Power Supply designed for use with stepper and servo drives. Output voltage nominally 68 VDC with up to 500W rated power. (Please note voltage rises to 75VDC with 250VAC input)
Tuning Cable for 3 Phase Leadshine Drive
SKU:LSK-016CABLE-ACH1000 programming cable to suit our ES series Leadshine steppers and ES series servo motor drives.
3.0 N.m NEMA 24 Open-Loop Stepper Motor Dual Shaft
SKU:MOT-128DDual shaft NEMA 24, 2 phase bipolar stepper motor with 3.0 N.m of holding torque. Rated at 5 A phase current, weighing 1.3 kg with 85 mm body length and 8 mm shaft diameter.
4.5 N.m NEMA 34 Open-Loop Dual Shaft Stepper Motor
SKU:MOT-130LDual shaft NEMA 34 frame size bipolar stepper motor with 46 kg·cm holding torque.
CABLE-DB26 Control Signal Cable for ACS806 Driver
SKU:LSK-055CABLE-DB26 Control Signal Cable 2.2 Meters for ACS806 Driver - with DB26 Connector.
1.3 N.m NEMA 23 Open-Loop Stepper Motor Dual Shaft
SKU:MOT-187Single shaft NEMA 23, 2 phase bipolar stepper motor with 1.3 N.m of holding torque. Rated at 4.0 A phase current, weighing 0.7 kg with 55 mm body length and 6.35 mm shaft diameter.
iEM-2331-L 3.1 N·m NEMA 23 Integrated Stepper Motor
SKU:SMC-1207iEM-2331-L from Leadshine is a 3.1 N·m NEMA 23 stepper motor with integrated driver. Standard pulse and direction (or CW/CCW) input. Advanced anti-resonance DSP driver.
iEM-2435 3.5 N·m NEMA 24 Integrated Stepper Motor
SKU:SMC-1209iEM-2435 from Leadshine is a 3.5 N·m NEMA 24 stepper motor with integrated driver. Standard pulse and direction (or CW/CCW) input. Advanced anti-resonance DSP driver.
iEM-2323 2.3 N·m NEMA 23 Integrated Stepper Motor
SKU:SMC-1204iEM-2323 from Leadshine is a 2.3 N·m NEMA 23 stepper motor with integrated driver. Standard pulse and direction (or CW/CCW) input. Advanced anti-resonance DSP driver.
iEM-RS2323 2.3 N·m NEMA 23 Integrated Stepper Motor with Modbus
SKU:SMC-1303iEM-RS Series is an integrated stepper motor with drive, and based on standard Modbus RTU protocol. Using RS485 communication it can network up to 31 axes. Its built-in PR feature with 16-segment position table (PR Mode) can save additional controllers in most of point-to-point applications, to greatly enhance system reliability and reduce the cost
iCS-2435 3.5 N·m NEMA 24 Integrated Closed Loop Stepper Motor
SKU:SMC-1249iCS series is integrated closed-loop stepper motor with 14-bit single-turn absolute encoder for smooth and jitter-free motor start-up. iCS-2435 from Leadshine is a 3.5 N·m NEMA 24 stepper motor with integrated driver. Standard pulse and direction (or CW/CCW) input.
Gear Box 10:1 NEMA 24 (60mm) stepper motor with 8mm shaft dia
SKU:MOG-001Leadshine Gear Box 10:1 for NEMA 24 (60mm) stepper motor with 8mm shaft dia