Leadshine

The CS-M21702 is a 0.21 N·m, 2 Phase NEMA 17 closed loop stepper motor with 1,000 line encoder for feedback. Rated at 1.5 A phase current, weighing 0.5 kg with 56 mm body length and 5.0 mm shaft diameter.

Single shaft NEMA 17, 2 phase bipolar stepper motor with 0.21 N.m of holding torque. Rated at 1 A phase current, weighing 0.2 kg with 33 mm body length and 5 mm shaft diameter.

CS-M21708 is a 0.8 N·m, 2 Phase NEMA 17 closed loop stepper motor with 1,000 line encoder for feedback. Rated at 2.5 A phase current, weighing 0.75 kg with 83 mm body length and 5.0 mm shaft diameter.

Single shaft NEMA 17, 2 phase bipolar stepper motor with 0.8 N.m of holding torque. Rated at 1.5 A phase current, weighing 0.5 kg with 60 mm body length and 5 mm shaft diameter.

0.9 N·m (128 Oz·In) 3 Phase NEMA 23 hybrid stepper motor with 1,000 line encoder for feedback.

Last units. This unit is reaching End of Life.

iES-2309 0.9 N·m NEMA 23 encoder-backed stepper motor with integrated driver. Standard pulse and direction (or CW/CCW) input. Advanced DSP driver uses encoder feedback for servo-like operation.

RS485 cable CABLE-TX1M0-LD2 with MOLEX CONNECTOR for ELD2-RS drives

The CS-M22313 is a 1.3 N·m, 2 Phase NEMA 23 closed loop stepper motor with 1,000 line encoder for feedback. Rated at 4.0 A phase current, weighing 0.9 kg with 75 mm body length and 8.0 mm shaft diameter.

Single shaft NEMA 23, 2 phase bipolar stepper motor with 1.3 N.m of holding torque. Rated at 3.0 A phase current, weighing 0.7 kg with 55 mm body length and 6.35 mm shaft diameter.

Single shaft NEMA 23, 2 phase bipolar stepper motor with 1.3 N.m of holding torque. Rated at 4.0 A phase current, weighing 0.7 kg with 55 mm body length and 6.35 mm shaft diameter.

Encoder cable CABLE-LD2-BM5M0 for ELDM servo motor with 1000lines/2500lines encoder and plastic connector. To use with SMC-411 driver.

DE-15 to bare wire encoder extension cable to suit two phase Easy Servo motors using the SMC-182 ES-D808 or SMC-184 ES-D1008 drives.

DE-15F to DE-15M encoder extension cable for three phase (smaller) Easy Servo motors using the SMC-180 ES-D508 drive.

Cable carries power from and Easy Servo Motor (ES-M series) to an Easy Servo Driver (ES-D series).

Leadshine ELDM80100V48HM-A4 1000 W brushless AC servo motor with 1000 line encoder.

12.0 N·m, 2 Phase NEMA 34 closed loop stepper motor with 1,000 line encoder for feedback. Rated at 6.0 A phase current, weighing 4.7 kg with 158 mm body length and 14.0 mm shaft diameter.

12.0 N·m, 2 Phase NEMA 34 closed loop stepper motor with 1,000 line encoder for feedback. Rated at 6.0 A phase current, weighing 4.7 kg with 158 mm body length and 14.0 mm shaft diameter. Has an IP65 environment rating

12.0 N·m, 3 Phase NEMA 42 closed loop stepper motor with 1,000 line encoder for feedback. Rated at 4.2 A phase current, weighing 2.7 kg with 161 mm body length and 19 mm shaft diameter.

Single shaft NEMA 34, 2 phase bipolar stepper motor with 12.0 N.m (1700 oz-in) of holding torque. Rated at 6 A phase current, weighing 4.5 kg with 129 mm body length and 14 mm shaft diameter.

Leadshine 57BL180D 180W brush-less DC servo motor with 1000 line encoder

2.0 N·m (283 Oz·In) 3 Phase NEMA 23 hybrid stepper motor with 1,000 line encoder for feedback.

Last units. This unit is reaching End of Life.

iES-2320 2.0 N·m NEMA 23 encoder-backed stepper motor with integrated driver. Standard pulse and direction (or CW/CCW) input. Advanced DSP driver uses encoder feedback for servo-like operation.

iST-2320 2.0 N·m NEMA 23 stepper motor with integrated driver. Standard pulse and direction (or CW/CCW) input. Advanced anti-resonance DSP driver.

The CS-M22323-S is 2.3 N·m, 2 Phase NEMA 23 closed loop stepper motor with 1,000 line encoder for feedback. Rated at 5.0 A phase current, weighing 1.3 kg with 96 mm body length and 6.35 mm shaft diameter.