3onedata

IMF204-2F is a high-performance unmanaged ring network serial to fiber MODEM designed for industrial application. It supports mutual point-to-point backups of two fiber ports or ring network redundancy of multiple devices. It provides 4 RS-485 serial ports and 2 fiber ports

P202-2CI is a CAN server that has integrated 2 CAN ports and 1 Ethernet port. It can implement interconnection between CAN-Bus network and Ethernet network easily 

MC201-F is a CAN bus signal to optical signal converter (single-mode SC 15km). 

MC201-F is a CAN bus signal to optical signal converter (multi-mode SC 2km). 

A RS485 Hub which allows one RS-485 bus or one RS-232 bus to be divided into 4 fully isolated RS-485 buses.

Converts 10Base-T or 100Base-TX Ethernet to a single SC-connector-terminated single mode fibre. 20 km transmission distance. DIN rail mount.

Converts CAN to RS-485 through a 2.0 kV optical isolation barrier. Supports CAN2.0A and CAN2.0B protocol. Screw terminals for all other RS485, CAN and power connections.

Converts RS-232, RS-485 or RS-422 to a pair of single-mode fibres with ST-connectors. 20 km transmission distance. Please note 2 Fibre Converters are required to form an end to end link.

Converts CAN to RS-232 through a 2.0 kV optical isolation barrier. Supports CAN2.0A and CAN2.0B protocol. DB9 Female connector for RS232, screw terminals for all other CAN and power connections.

Converts RS-232, RS-485 or RS-422 to a pair of single-mode fibres with SC connectors. 20 km transmission distance.

RS-232/485/422 to fibre converter (multi-mode SC 2km).
Two converters are required to form an end-to-end link 

A power Plug is NOT included. If you require a power plug please check PLP-003 (12Vdc) OR PLP-004 (24Vdc)

Converts RS-232 to a pair of single-mode fibres with SC-connectors. 20 km transmission distance. Please note these converters are sold individually. Two converters are required to form an end-to-end link.

Converts RS-232, RS-485 or RS-422 to a pair of multi-mode fibres with ST connectors. 2 km transmission distance. Please note these converters are sold individually. Two converters are required to form an end-to-end link.

Converts RS-232 to a pair of multi-mode fibres with ST-connectors. 2 km transmission distance. Please note these converters are sold individually. Two converters are required to form an end-to-end link.

Converts RS-232, RS-422 or RS-485 to RS-422 and RS-485 through a 2.5 kV optical isolation barrier. Female DB-9 for RS-232 and screw terminals for all other connections.

Port-powered, opto-isolated RS-232 to RS-485 converter. DE-9 female connector on the RS-232 side, DE-9 male or screw terminals on the RS-485 side. Optical isolation protects devices from transient surges and ground loops.

Connects an RS-232, RS-422 or RS-485 serial signal to an ethernet network. 10/100 Mbps ethernet supported. DE-9 and screw terminals for serial port. 9 to 48 VDC powered. 

Converts 10Base-T or 100Base-TX Ethernet to two SC-connector single mode fibres. 20 km transmission distance.

Converts 10Base-T or 100Base-TX Ethernet to a dual ST-connector-terminated multi mode fibre. 2 km transmission distance.

Converts 10Base-T or 100Base-TX Ethernet to a single SC-connector-terminated single mode fiber. 20 km transmission distance.

Converts RS-232 to RS-422 and RS-485 through a 2.5 kV optical isolation barrier. Female DB-9 (RS-232) to male DB-9 and RJ45 (RS-422/RS-485). Screw terminal adapter included.

TOD-0221 FL45 RJ45 Ethernet Surge Protection Suitable for 10Base-T/100Base-T/100Base-T standard

TOD-022 FL45 RJ45 Ethernet Surge Protection Suitable for 10Base-T/100Base-T standard

Simple in line module converts RS-232 to RS-422 and RS-285. Draws power from the RS-232 port. Female to male DE-9 connectors with screw terminal adapter for RS-422/RS-485.