Draw Wire Incremental Encoder with 1m wire length, 0.1m resolution, ABZ Phase Open Collector Output, 8-26VDC Powered.

Site-Log Current Datalogger, programmable input selections for each channel:
4 ~ 20 mA, 0 ~ 50 mA.

Unmanaged Fast Ethernet Switch, 5-Port Slim-Type 10/100/1000 Mbps industrial Ethernet switch with dual redundant power inputs and DIN Rail Mount (Higher Operating Temperature Range compare to EHG3005).

CG-R16 ClickNGo Module has a 1 x 16A relay output and was designed to work as an expansion module for NOVUS line of modular controllers such as N20K48.

iCS-RS Series is an integrated stepper motor with drive, and based on standard Modbus RTU protocol. Using RS485 communication it can network up to 31 axes. Its built-in PR feature with 16-segment position table (PR Mode) can save additional controllers in most of point-to-point applications, to greatly enhance system reliability and reduce the cost

TCG140-4G is a 4G LTE universal IO module for remote monitoring and control over cellular networks. It has digital I/Os, analog inputs and utilises 1-Wire interface. The module supports MQTT, SMS alarm, HTTP/HTTPS post and API commands.

This industrial USB to RS485 converter has the original FT232RL and SP485EEN inside. It features embedded protection circuits such as lightning-proof, resettable fuse, ESD protection, and TVS diode, etc. It's pretty small in size.

Horizontal  SUS304 Stainless Steel Float Switch, M10 Thread

The TL400-I stands out as an advanced sensor for measuring level and volume, utilizing a non-intrusive method ideal for detecting liquids, grains, fluids, and bulk solids in both stationary and dynamic settings. Utilizing a low-power laser beam, it conducts numerous measurements per second, while an advanced algorithm accurately calculates level, converting it into volume and distance across different units.

**Comes with an M12 Plug-in 2m cable with 4 wires.

The TH500A by Hanyoung Nux is a sophisticated temperature/humidity controller. It is capable of fully programmable PID control, pattern/delay recognition and detailed logging. 

Designed to be paired with the HNC-061 as a datalogger for USB flash drives.

The analog output module MU210-502 has 6 analog outputs (0/4-20 mA, 0-10V). Support for Modbus TCP, MQTT, SNMP, SNTP.

The digital output module MU210-412 has 24 digital transistor outputs and has support for Modbus TCP, MQTT and SNMP and features pulse width modulation and high frequency output.

The EMC310 is a memory storage and communication converter specifically for the TH500 (HNC-060) and 300 series, designed for data logging. It can connect via RS232, and has 32 MB of internal memory, with room for a USB flash drive.

Phase control solid state relay with 4 to 20 mA input controls up to 40 A and 240 VAC. Built-in Heatsink. DIN Rail Mounted

Phase control solid state relay with 4 to 20 mA input controls up to 40 A and 440 VAC. Built-in Heatsink. DIN Rail Mounted

Four channels non isolated current transformer (CT) 0~5A/AC analog input module with Ethernet communication

Eight channels non isolated current transformer (CT) 0~5A/AC analog input module with Ethernet communication

Leadshine ELVM6040V48FH-B25-HD 400W 48VDC 1.27Nm brushless servo motor with 2,500 line encoder and IP65 rated.