- Clearance
- Arduino
- CNC
- Communications
- Computer Products
- Controllers
- Data Acquisition
- Data Loggers
- Electrical Switches
- Electrical Terminals-Wiring
- Enclosures
- Industrial IoT
- Large Displays
- Lighting
- Modbus-Bacnet-MBus Products
- Motor Drivers & Controllers
- Motors & Accessories
- Panel Meters
- PLCs & HMIs
- Power Supplies
- Prototyping
- Relays & Relay Cards
- Security
- Sensors
- 1 Wire
- Accelerometers
- Capacitive Proximity
- Chemical
- Compass
- Current-Voltage
- Float Switches
- Flow
- Gas
- Hall Effect
- Inclinometers
- Inductive Proximity
- Length & Distance
- Light & Colour
- Limit & Foot Switches
- Liquid Level
- Load Cells
- PhotoElectric Switches
- Pressure Transducers
- Smartphone Based
- Temperature RTD and T/C
- Temperature Other
- Temperature & Humidity
- Ultrasonic
- VOC - Air Quality
- Signal Conditioners
- Software
- Test Equipment
- Timers
- Weather
Leadshine
Sort by:Recommended
0.21 N.m 2 Phase NEMA 17 CS Series Closed-Loop Stepper Motor
SKU:MOT-175The CS-M21702 is a 0.21 N·m, 2 Phase NEMA 17 closed loop stepper motor with 1,000 line encoder for feedback. Rated at 1.5 A phase current, weighing 0.5 kg with 56 mm body length and 5.0 mm shaft diameter.
20.0 N.m NEMA 42 Open-Loop Stepper Motor
SKU:MOT-176Single shaft NEMA 42, 2 phase bipolar stepper motor with 20.0 N.m of holding torque. Rated at 6 A phase current, weighing 8.4 kg with 150 mm body length and 19 mm shaft diameter.
28.0 N.m NEMA 42 Open-Loop Stepper Motor
SKU:MOT-177Single shaft NEMA 42, 2 phase bipolar stepper motor with 28.0 N.m of holding torque. Rated at 6.5 A phase current, weighing 11.7 kg with 201 mm body length and 19 mm shaft diameter.
0.21 N.m NEMA 17 Open-Loop Stepper Motor
SKU:MOT-178Single shaft NEMA 17, 2 phase bipolar stepper motor with 0.21 N.m of holding torque. Rated at 1 A phase current, weighing 0.2 kg with 33 mm body length and 5 mm shaft diameter.
0.8 N.m NEMA 17 Open-Loop Stepper Motor
SKU:MOT-179Single shaft NEMA 17, 2 phase bipolar stepper motor with 0.8 N.m of holding torque. Rated at 1.5 A phase current, weighing 0.5 kg with 60 mm body length and 5 mm shaft diameter.
1.3 N.m NEMA 23 Open-Loop Stepper Motor
SKU:MOT-185Single shaft NEMA 23, 2 phase bipolar stepper motor with 1.3 N.m of holding torque. Rated at 3.0 A phase current, weighing 0.7 kg with 55 mm body length and 6.35 mm shaft diameter.
2.6 N.m NEMA 23 Open-Loop Stepper Motor
SKU:MOT-186Single shaft NEMA 23, 2 phase bipolar stepper motor with 2.6 N.m of holding torque. Rated at 4.0 A phase current, weighing 1.4 kg with 84 mm body length and 8.0 mm shaft diameter.
DM322E, 2.2 A, Open-Loop Stepper Driver
SKU:SMC-016The DM322E open loop stepper driver is able to power 2 phase (1.8°) and 4 phase (0.9°) stepper motors smoothly with very low motor heating & noise. It can provide up to 2.2 A, operating at 12-30 VDC.
EM870S, 7 A, Open-Loop Stepper Driver
SKU:SMC-057The EM870S open loop stepper driver is able to power 2 phase (1.8°) and 4 phase (0.9°) stepper motors smoothly with very low motor heating & noise. It can provide up to 7.0 A, operating at 20-80 VDC.
EM415S, 1.5 A, Open-Loop Stepper Driver
SKU:SMC-050The EM415S open loop stepper driver is able to power 2 phase (1.8°) and 4 phase (0.9°) stepper motors smoothly with very low motor heating & noise. It can provide up to 1.5 A, operating at 18-36 VDC.
EM2RS-556, 5.6 A, MODBUS Control Open-Loop Stepper Driver
SKU:SMC-023The EM2RS-556 is a Modbus (RS485) control open loop stepper driver, able to power 2 phase stepper motors smoothly with very low motor heating & noise. It can provide up to 5.6 A, operating at 20-50 VDC.
CS2RS-D507, 7.0 A, MODBUS Control Closed-Loop Stepper Driver
SKU:SMC-024The CS2RS-D507 is a Modbus (RS485) control closed loop stepper driver, able to power 2 phase stepper motors smoothly with very low motor heating & noise. It can provide up to 7.0 A, operating at 20-50 VDC.
Power and Encoder Cables for Servo Motor 3 metres
SKU:MOT-4554Power and Encoder Cables for AC Servo Motor 3 meters long
3.0 Metre Encoder Cable for ELDM Servo Motor
SKU:LSK-030Encoder cable CABLE-LD2-BM5M0 for ELDM servo motor with 1000lines/2500lines encoder and plastic connector. To use with SMC-411 driver.
5.0 Metre Encoder Cable for ELDM Servo Motor
SKU:LSK-031Encoder cable CABLE-LD2-BM5M0 for ELDM servo motor with 1000lines/2500lines encoder and plastic connector. To use with SMC-411 driver.
10.0 Metre Encoder Cable for ELDM Servo Motor
SKU:LSK-032Encoder cable CABLE-LD2-BM5M0 for ELDM servo motor with 1000lines/2500lines encoder and plastic connector. To use with SMC-411 driver.
2.3 N.m NEMA 23 Open-Loop Stepper Motor
SKU:MOT-125LSingle shaft NEMA 23 frame size bipolar stepper motor with 2.3 N.m (326 oz-in) holding torque.
180W Brushless DC Servo Motor with 1000 Line Encoder (Circular Face)
SKU:MOT-401Leadshine 57BL180D 180W brush-less DC servo motor with 1000 line encoder
DMA860E, 7.2 A, Open-Loop Stepper Driver
SKU:SMC-019The DMA860E is a digital stepper drive with simple design and easy setup. Operating voltage of 18-80VAC or 24-110VDC and it can output up to 7.2A current making it suitable for NEMA 23, 24, 34 and 42 stepper motors.
DMA882S-IO, 8.2 A, Speed adjustable Stepper Driver
SKU:SMC-014SThe DMA882S-IO is an open loop digital stepper drive. It is designed to run at set speeds using a Run signal and Direction Signal. Speed is adjusted by DIP switches Operating voltage of 20-80VAC or 30-110VDC and it can output up to 8.2A current making it suitable for NEMA 23, 24, 34 and 42 stepper motors
EM422S, 2.2 A, Open-Loop Stepper Driver
SKU:SMC-051The EM422S open loop stepper driver is able to power 2 phase (1.8°) and 4 phase (0.9°) stepper motors smoothly with very low motor heating & noise. It can provide up to 2.2 A, operating at 18-36 VDC.
12.0 N.m 2 Phase NEMA 34 CS Series Closed-Loop Stepper Motor IP65
SKU:MOT-168W12.0 N·m, 2 Phase NEMA 34 closed loop stepper motor with 1,000 line encoder for feedback. Rated at 6.0 A phase current, weighing 4.7 kg with 158 mm body length and 14.0 mm shaft diameter. Has an IP65 environment rating
CS3E-D507 7A EtherCAT 2 Phase CS Series Closed Loop Stepper Drive
SKU:SMC-171CS3E-D507 is a new Ethercat closed-loop stepper motor driver with encoder feedback input, operating at 20-50 VDC. Suits 2 phase stepper motors up to 7.0 A. Has digital inputs and outputs for control such as limit switch and brake.
Bipolar Stepper Motor 0.4Nm Single Shaft
SKU:MOT-120LThe Leadshine 40CM04 is a single shaft NEMA 17 frame size bipolar stepper motor with 0.4 N.m (57 oz-in) holding torque