Foxtam Controls

The YWA10 is a relay alarm module that features 10 inputs, 2 separate relay outputs. Accepts 24 VAC/DC input signals and can be DIN rail mounted.

0.1-10 VDC adjustable setpoint trip relay with two independent outputs. 2% hysteresis at each setpoint. SPCO relay outputs rated to 10 A @ 250 VAC. 24 VDC powered and DIN rail mount.

Standard 11 pin female connector. Screw terminals. Suits our range of relays and timers.

41F-TAG sheet of 16 Marker tabs for 41F series 6mm Relays

41F-20 is a 20 Way Jumper Bar to suit 6mm Relay

1 to 20 mA adjustable setpoint trip relay with two independent outputs. 2% hysteresis at each setpoint. SPCO relay outputs rated to 10 A @ 250 VAC. 24 VDC powered and DIN rail mount.

4 to 20 mA loop powered 24 VDC with primary current of 100A. Accuracy class 1

4 to 20mA loop powered 24VDC with primary current of 250A. Accuracy class 1

A monitoring relay designed to monitor the integrity of a 4 to 20 mA signal.

This DIN rail mount timer is capable of switching a large load with 5 selectable pre-programmed time ranges from 1 day to 1 month. 4PCO heavy duty relay contacts. 12 to 250 VAC/DC powered.

Standard 8 pin female connector. Screw terminals. Suits our range of relays and timers.

230V AC TO Adjustable 0-10VDC Output BMS (Building Management Systems) Power Supply With Remote Potentiometer Kit

DIN-rail mount cyclic timer with configurable on and off times. Features selectable "pulse first" or "pause first" for initial timing function. 4PCO relay output, selectable multi-time range from 1 s to 100 days.

DIN-rail mount, SPCO, single time range timer designed to reset and restart a control system when its voltage dips below 80% of the nominal supply voltage.

The MOD-W-1 is a DIN Rail mount liquid level control relay. It features adjustable sensitivity and time delay from 0.1 to 10 sec. SPCO output with selectable pump up or pump down modes as well as relay proving function.

The MOD-W-1 is a DIN Rail mount liquid level control relay powered from 24 VAC. It features adjustable sensitivity and time delay from 0.1 to 10 sec. SPCO output with selectable pump up or pump down modes as well as relay proving function.

The MOD-W-1 is a DIN Rail mount liquid level control relay powered from 24 VDC. It features adjustable sensitivity and time delay from 0.1 to 10 sec. SPCO output with selectable pump up or pump down modes as well as relay proving function.

FOX21 DIN-rail or foot mount current transformer with a 100 to 5 A ratio. With built in sliding sealable terminal covers. 

FOX21 DIN-rail or foot mount current transformer with a 150 to 5A ratio. With built in sliding sealable terminal covers. 

FOX21 DIN-rail or foot mount current transformer with a 200 to 5A ratio. With built in sliding sealable terminal covers. 

FOX21 DIN-rail or foot mount current transformer with a 60 to 5A ratio. With built in sliding sealable terminal covers. 

A Din rail mounted current sensing relay dedicated for DC earth fault monitoring, such as insulation deterioration on a DC system. The unit is supplied complete with a dedicated DC Earth Fault CT

A Din rail mounted current sensing relay dedicated for DC earth fault monitoring, such as insulation deterioration on a DC system. The unit is supplied complete with a dedicated DC Earth Fault CT

A Din rail mounted current sensing relay dedicated for DC earth fault monitoring, such as insulation deterioration on a DC system. The unit is supplied complete with a dedicated DC Earth Fault CT