Leadshine

Cable carries power from and Easy Servo Motor (ES-M series) to an Easy Servo Driver (ES-D series).

DE-15F to DE-15M encoder extension cable for three phase (smaller) Easy Servo motors using the SMC-180 ES-D508 drive and our 180 W brush-less servo motor.

DE-15F to DE-15M encoder extension cable for three phase (smaller) Easy Servo motors using the SMC-180 ES-D508 drive.

DE-15F to DE-15M encoder extension cable for three phase (smaller) Easy Servo motors using the SMC-180 ES-D508 drive.

DE-15 to bare wire encoder extension cable to suit two phase Easy Servo motors using the SMC-182 ES-D808 or SMC-184 ES-D1008 drives.

DE-15 to bare wire encoder extension cable to suit two phase Easy Servo motors using the SMC-182 ES-D808 or SMC-184 ES-D1008 drives.

DE-15 to bare wire encoder extension cable to suit two phase Easy Servo motors using the SMC-182 ES-D808 or SMC-184 ES-D1008 drives.

DE-15 to bare wire encoder extension cable to suit two phase Easy Servo motors using the SMC-182 ES-D808 or SMC-184 ES-D1008 drives.

The Leadshine MX3660 is a high performance 3-axis stepper drive with built-in breakout board and I/O based on the latest DSP technology.

The DM805-AI is a stepper motor driver with 0 to 5 VDC analog input for speed control. 18 to 80 VDC powered, with current up to 7.0 A peak.

DM870 fully digital microstepping stepper motor driver with anti-resonance tuning. Automatic or computer-driven tuning. 20 to 80 VDC powered with output current up to 7.0 A peak.

The EM402 is an advanced stepper motor driver with features including electrical damping, anti-resonance, start-up smoothing, multi-stepping and sensorless stall detection. 20 to 48 VDC powered with output current up to 4.2 A peak.

The EM806 is an advanced stepper motor driver with features including electrical damping, anti-resonance, start-up smoothing, multi-stepping and sensor-less stall detection. 20 to 80 VDC powered with output current up to 8.2 A peak.

The SMC-033 is not recommended for new designs. Please consider the newer SMC-057

iES-2309 0.9 N·m NEMA 23 encoder-backed stepper motor with integrated driver. Standard pulse and direction (or CW/CCW) input. Advanced DSP driver uses encoder feedback for servo-like operation.

The EM402 is an advanced stepper motor driver with features including electrical damping, anti-resonance, start-up smoothing, multi-stepping and sensorless stall detection. 20 to 40 VDC powered with output current up to 2.2 A peak.

iST-2320 2.0 N·m NEMA 23 stepper motor with integrated driver. Standard pulse and direction (or CW/CCW) input. Advanced anti-resonance DSP driver.

iES-2320 2.0 N·m NEMA 23 encoder-backed stepper motor with integrated driver. Standard pulse and direction (or CW/CCW) input. Advanced DSP driver uses encoder feedback for servo-like operation.

DE-9 to Plug In Terminal Programming cable to suit Leadshine iST integrated Stepper Motors and iES Easy Servo motor drives.

Single shaft NEMA 34, 2 phase bipolar stepper motor with 12.0 N.m (1700 oz-in) of holding torque. Rated at 6 A phase current, weighing 4.5 kg with 129 mm body length and 14 mm shaft diameter.

The EM542S open loop stepper driver is able to power 2 phase (1.8°) and 4 phase (0.9°) stepper motors smoothly with very low motor heating & noise. It can provide up to 4.2 A, operating at 20-50 VDC.

New - The EM556S from Leadshine is able to power 2 phase (1.8°) and 4 phase (0.9°) stepper motors smoothly with very low motor heating & noise. It can take 20-50VDC supply voltage and output 1.8 to 5.6A (4.0A RMS) current.

Leadshine CS-D508 is a stepper motor driver with encoder feedback input. Operating at 20-50VDC, max 8A output current. Suits 2 phase CS Series Closed Loop Stepper Motors.

NOTE: When powering with 12VCC or 24VCC, the conroller requires external resistors in series to it's terminals (refer to hardware manual).

The CS-M22323-S is 2.3 N·m, 2 Phase NEMA 23 closed loop stepper motor with 1,000 line encoder for feedback. Rated at 5.0 A phase current, weighing 1.3 kg with 96 mm body length and 6.35 mm shaft diameter.

3.1 N·m, 2 Phase NEMA 23 closed loop stepper motor with 1,000 line encoder for feedback. Rated at 5.0 A phase current, weighing 1.6 kg with 105 mm body length and 8 mm shaft diameter.