Leadshine

CABLE-ACH1000 programming cable to suit our ES series Leadshine steppers and ES series servo motor drives.

DE-9 to Plug In Terminal Programming cable to suit Leadshine iST integrated Stepper Motors and iES Easy Servo motor drives.

DE-9 to RJ12 Programming cable to suit our Leadshine stepper and servo motor drives.

PS806-12 Linear Power Supply designed for use with stepper and servo drives. Output voltage nominally 68 VDC with up to 500W rated power. (Please note voltage rises to 75VDC with 250VAC input)

Power and Encoder Cables for AC Servo Motor 5 metres long

Power and Encoder Cables for AC Servo Motor 3 meters long

Power and Encoder Cables for AC Servo Motor 2 meters long

Power and Encoder Cables for AC Servo Motor 10 meters long

The iSV-B23180 integrated servo motor is a NEMA 23 brushless DC servo motor integrated with a 1,000-line (4,000 PPR) encoder and a DSP-based servo drive. 

The iSV-B23130-01 integrated servo motor is a NEMA 23 brushless DC servo motor integrated with a 1,000-line (4,000 PPR) encoder and a DSP-based servo drive. 

400W 60VDC 6.7 A switched-mode regulated power supply for stepper and servo motors.

Cable-PC-1 DE-9 to 4 pin programming cable. 1.2-meter (3.9-foot) RS232 cable for tuning the EM402, DM422, DM422C, DCS303 and ACS306 drives with ProTuner. 

The Leadshine iSV2-RS8075V48 is an integrated servo motor with a 80mm frame size low-voltage servomotor integrated with a 17bit encoder and a servo drive, Can be controlled by Modbus RTU and pulse control

iEM-RS Series is an integrated stepper motor with drive, and based on standard Modbus RTU protocol. Using RS485 communication it can network up to 31 axes. Its built-in PR feature with 16-segment position table (PR Mode) can save additional controllers in most of point-to-point applications, to greatly enhance system reliability and reduce the cost

iEM-2435 from Leadshine is a 3.5 N·m NEMA 24 stepper motor with integrated driver. Standard pulse and direction (or CW/CCW) input. Advanced anti-resonance DSP driver.

iEM-2331-L from Leadshine is a 3.1 N·m NEMA 23 stepper motor with integrated driver. Standard pulse and direction (or CW/CCW) input. Advanced anti-resonance DSP driver.

iEM-2323 from Leadshine is a 2.3 N·m NEMA 23 stepper motor with integrated driver. Standard pulse and direction (or CW/CCW) input. Advanced anti-resonance DSP driver.

iCS-RS Series is an integrated stepper motor with drive, and based on standard Modbus RTU protocol. Using RS485 communication it can network up to 31 axes. Its built-in PR feature with 16-segment position table (PR Mode) can save additional controllers in most of point-to-point applications, to greatly enhance system reliability and reduce the cost

iCS-RS Series is an integrated stepper motor with drive, and based on standard Modbus RTU protocol. Using RS485 communication it can network up to 31 axes. Its built-in PR feature with 16-segment position table (PR Mode) can save additional controllers in most of point-to-point applications, to greatly enhance system reliability and reduce the cost

iCS series is integrated closed-loop stepper motor with 14-bit single-turn absolute encoder for smooth and jitter-free motor start-up. iCS-2435 from Leadshine is a 3.5 N·m NEMA 24 stepper motor with integrated driver. Standard pulse and direction (or CW/CCW) input. 

iCS-2331-L from Leadshine is a 3.1 N·m NEMA 23 closed loop stepper motor with integrated driver. Standard pulse and direction (or CW/CCW) input. Advanced anti-resonance DSP driver.

iCS-2323 from Leadshine is a 2.3 N·m NEMA 23 closed loop stepper motor with integrated driver. Standard pulse and direction (or CW/CCW) input. Advanced anti-resonance DSP driver.

Leadshine Gear Box 10:1 for NEMA 24 (60mm) stepper motor with 8mm shaft dia

Leadshine Gear Box 10:1 for NEMA 34 (86mm) stepper motor with 14mm shaft dia