Foxtam Controls

A Din rail mounted current sensing relay dedicated for DC earth fault monitoring, such as insulation deterioration on a DC system. The unit is supplied complete with a dedicated DC Earth Fault CT

A Din rail mounted current sensing relay dedicated for DC earth fault monitoring, such as insulation deterioration on a DC system. The unit is supplied complete with a dedicated DC Earth Fault CT

A Din rail mounted current sensing relay dedicated for DC earth fault monitoring, such as insulation deterioration on a DC system. The unit is supplied complete with a dedicated DC Earth Fault CT

The YWA10 is a relay alarm module that features 10 inputs, 2 separate relay outputs. Accepts 24 VAC/DC input signals and can be DIN rail mounted.

Slim isolated signal converter with dual output converts a single, selectable analog input signal to dual analog outputs. The input signal type and each output signal type can be configured with on-board DIP switches.

1 to 20 mA adjustable setpoint trip relay with two independent outputs. 2% hysteresis at each setpoint. SPCO relay outputs rated to 10 A @ 250 VAC. 24 VDC powered and DIN rail mount.

0.1-10 VDC adjustable setpoint trip relay with two independent outputs. 2% hysteresis at each setpoint. SPCO relay outputs rated to 10 A @ 250 VAC. 24 VDC powered and DIN rail mount.

Slim isolated selectable analog input signals with selectable single analog output. It features on-board DIP switches that enable the user to select their preferred input/output signal.

11WRSTCT(KLIXON,2xSPCO) pump seal leak monitor relay / water leak detection relay & thermistor monitoring relay features detection of water contamination of oil, detection of water leaks from pipes in buildings, isolated probe supply and LED indication, Klixon version.

11WRSTC pump seal leak monitor relay / water leak detection relay & thermistor monitoring relay features detection of water contamination of oil, detection of water leaks from pipes in buildings, isolated probe supply and LED indication, Also available Klixon version.

11WRSTC pump seal leak monitor relay / water leak detection relay & thermistor monitoring relay features detection of water contamination of oil, detection of water leaks from pipes in buildings, isolated probe supply and LED indication, Also available Klixon version.

Din rail mounted under-speed relay suitable for all kinds of machinery to detect loss of speed and pulse continuity. It accepts NAMUR proximity switch, PNP sensor or clean contact input signals. The period between pulses is adjustable from 0.06 to 160  secs

Din rail mounted under-speed relay suitable for all kinds of machinery to detect loss of speed and pulse continuity. It accepts NAMUR proximity switch, PNP sensor, or clean contact input signals. The period between pulses is adjustable from 0.5 seconds to 21 mins

Programmable latching and sequence relay. The outputs are four individual single pole normally open contacts. The unit is programmed via three front selector switches.

4 to 20 mA loop powered 24 VDC with primary current of 250 A. Accuracy class 1

4 to 20 mA looop powered 24 VDC with primary current of 100 A. Accuracy class 1

The YWRIT is a 1 to 20 mA adjustable setpoint trip relay with one SPCO relay output. SPCO relay outputs rated to 10 A @ 250 VAC. 24 VDC powered and DIN rail mount.

DIN rail mount, 4-wire system phase failure relays with independent over & under voltage control and adjustable time delay sequence (0.1 to 10 sec). SPCO relay output rated to 10 A @250 VAC. These are transformer based, thus it will ignore transients and harmonic distortions.

DIN rail mount, 4-wire system phase failure relays with independent over & under voltage control and optional adjustable time delay sequence (0.1 to 10 sec). SPCO relay output rated to 10 A @250 VAC. These are transformer based, thus it will ignore transients and harmonic distortions.

DIN rail mount, 3-wire system phase failure relays with independent over & under voltage control and optional adjustable time delay sequence (0.1 to 10 sec). SPCO relay output rated to 10 A @ 250 VAC. These are transformers based, thus it will ignore transients and harmonic distortions.

Mechanical plant extension timers, also known as “override timers†or “caretaker timers†within the BMS & HVAC industry. Totally mechanically driven by a clockwork spring, therefore no auxiliary supply is required. The moment the setting knob is turned pass zero to the set time required, the output contact switches, and the timer will then start running back to zero.

A conveniently packaged Din rail mounted AC or DC voltage input to an adjustable 4-20mA output module. Designed for process control systems with “HAND / OFF / AUTO” applications.

A conveniently packaged Din rail mounted AC or DC voltage input to an adjustable 4-20mA output module. Designed for process control systems with “HAND / OFF / AUTO” applications.

230V AC TO Adjustable 0-10VDC Output BMS (Building Management Systems) Power Supply With Remote Potentiometer Kit