ATOP

Connects an RS-232, RS-422 or RS-485 serial signal to an ethernet network. 10/100 Mbps ethernet supported. 4-Pin D-code Female M12 connection. 9-48 VDC powered.

Modbus TCP to Modbus ASCII/RTU converter gateway allows Modbus TCP masters to communicate with serial Modbus slave devices via RS-232/RS-485/RS-485 interfaces.

The SE5904D replaces the SE5404. Connects four RS-232, RS-422 or RS-485 serial signals to an ethernet network. 10/100 Mbps ethernet supported. Four DE-9 male serial ports. 9 to 48 VDC powered.

MW5502C Industrial Wireless Modbus Gateway will provide you a flexible platform to convert bi-directionally Modbus RTU/ASCII/TCP through wired and wireless Ethernet Networks.

MW5501C Industrial Wireless Modbus Gateway will provide you a flexible platform to convert bi-directionally Modbus RTU/ASCII/TCP through wired and wireless Ethernet Networks.

AW5500 is an industrial, extremely flexible and cost-effective wireless device that supports access point (AP), Bridge, Wireless Distribution System (WDS) and Client modes of operation. It also supports IEEE 802.11 a/b/g/n using either the 2.4GHz or 5GHz frequency bands - for maximum compatibility with other Wi-Fi devices and lightning fast data-rates. It has 9 to 48 VDC powered and 5.85 W power consumption.

SW5501 is an industrial serial device server that enables any device with 1 serial port (RS-232/422/485) to communicate wirelessly over an IEEE 802.11 a/b/g/n network. Packed in an IP50 rugged metal housing with DIN rail mountable case. It is 9 to 48 VDC powered and has 4.5 W power consumption.

MB5202TB from Atop (Taiwan) is a 2 port Modbus TCP to Modbus ASCII/RTU converter gateway which allows Modbus TCP masters to communicate with serial Modbus slave devices via RS-232/RS-485/RS-485 interfaces. It is fitted with Terminal blocks.

Converts RS-232, RS-485 or RS-422 to a pair of multi-mode fiber with SC connectors. It supports Multi-mode 2 Km.

Modbus TCP to Modbus ASCII/RTU converter gateway allows Modbus TCP masters to communicate with serial Modbus slave devices via isolated RS-422/485 interfaces with TB5 screw terminals.

Not available for backorder.

EGH2308 is an 8 port unmanaged ethernet switch that has gigabit uplinks. The device has IP50 rated metal enclosure. 9 to 48 VDC powered.

Modbus TCP to Modbus ASCII/RTU converter gateway allows Modbus TCP masters to communicate with serial Modbus slave devices via RS-232/RS-485/RS-485 interfaces.

Modbus TCP to Modbus ASCII/RTU converter gateway allows Modbus TCP masters to communicate with serial Modbus slave devices via RS-232/RS-485/RS-485 interfaces. It is fitted with Terminal block not D9 connector.

Unmanaged Fast Ethernet Switch, 5-Port Slim-Type 10/100/1000 Mbps industrial Ethernet switch with dual redundant power inputs and DIN Rail Mount (Higher Operating Temperature Range compare to EHG3005).

Connects two RS-232, RS-422 or RS-485 serial signals to an ethernet network. 10/100 Mbps ethernet supported. Two DE-9 serial ports. 5 to 30 VDC powered.

Not available for backorder.

Unmanaged Fast Ethernet Switch, 5-Port Slim-Type 10/100/1000 Mbps industrial Ethernet switch with dual redundant power inputs and DIN Rail Mount.

DIN rail mount, 10/100 Mbps industrial Ethernet switch with dual redundant power inputs.

DIN rail mount, 10/100 Mbps industrial ethernet switch with dual redundant power inputs.

Connects an RS-232, RS-422 or RS-485 serial signal to an ethernet network. 10/100 Mbps ethernet supported. DE-9 serial port. 5 to 30 VDC powered.

Not available for backorder.

DE-9 to 5 Screw Terminal Board. Suitable for SE5001 and SE5002 for RS-422/485 connections.

Not available for backorder.