Novus

Novus' differential temperature controller is designed for solar water heating applications. Two NTC-type temperature sensor inputs and two control output. 12 to 30 VDC Powered.

Economic and efficient temperature controller, with PID, Pulse Output, 2 Relay outputs, USB interface and many other features. 230 VAC powered. Auto tuning and Loop Break Detection.

N1030-PR Compact sized PID Temperature Controller with auto tuning PID and Timer. 230 VAC powered. Input accepts thermocouples J, K, T and Pt100 sensors. Pulse and Relay outputs

N1030T-PR Compact sized PID Temperature Controller with auto tuning PID and Timer. 12-24 Vdc / 24 Vac powered. Input accepts thermocouples J, K, T and Pt100 sensors. Pulse and Relay outputs

N1050-PR-230 VAC Compact sized PID temperature controller with vivid LCD display, auto tuning PID, soft start and ramp and soak. Input accepts thermocouples J, K, T and Pt100 sensors. Pulse and Relay outputs.

N1050-PR-24VAC/DC Compact sized PID temperature controller with vivid LCD display, auto tuning PID, soft start and ramp and soak. Input accepts thermocouples J, K, T and Pt100 sensors. Pulse and Relay outputs.

The Novus DigiRail Connect RAMIX features both a Modbus TCP and Modbus RTU communications and has 2 universal analog inputs, 2 analog out, 4 digital input and counter (32bit) and 2 relay out. Counts are stored in non-volatile memory so they are not lost after power failure.

The Novus DigiRail Connect RAMIX features both a Modbus TCP and Modbus RTU communications and has 2 universal analog inputs, 2 analog out, 4 digital input and counter (32bit) and 3 digital out. Counts are stored in non-volatile memory so they are not lost after power failure.

Panel mount Refrigeration Controller with 2 NTC sensors input. It has 3 relay outputs: compressor, defrosting and fan. It requires 12-24 VDC power input.

NP785-20 Ultra Low Differential Pressure Transmitter with range -20 to 20mbar. Output signal DC 0 to 10 V or 4 to 20 mA and slave Modbus RTU, in one-only-model

NP785-05 Ultra Low Differential Pressure Transmitter with range -5 to 5mbar. Output signal DC 0 to 10 V or 4 to 20 mA and slave Modbus RTU, in one-only-model

N1030-PR-24V Compact sized PID temperature controller with auto tuning PID, 12 to 24 VDC powered. Input accepts thermocouples J, K, T and Pt100 sensors. Pulse and Relay outputs.

Panel mount Refrigeration Controller with 2 NTC sensors input. It has 3 relay outputs: compressor, defrosting and fan. It requires 12-24 VDC power input.

Novus' differential temperature controller is designed for solar water heating applications. Two NTC-type temperature sensor inputs and two control output. 230VAC Powered.

The Novus DigiRail Connect DMIX features both a Modbus TCP and Modbus RTU communications and has 8 digital input and counter (32bit) and 8 Digital out. Counts are stored in non-volatile memory so they are not lost after power failure.

Panel mount thermostat with included NTC sensor on 2 m lead. Configurable for a huge range of heating and cooling applications. 230VAC powered.

CET-001 HAS BEEN REPLACED BY CET-0011, WHICH HAS RS485

Wall mount RHT-Climate WM Temperature and Humidity Sensor 4-20mA or 0-10VDC outputs, RS485 Modbus RTU Communications. Powered by 12 to 30VDC

The Novus DigiRail Connect DMIX features both a Modbus TCP and Modbus RTU communications and has 8 digital input and counter (32bit) and 4 Relay out. Counts are stored in non-volatile memory so they are not lost after power failure.

DigiRail NXprog is an Arduino IDE programmable device that has analog and digital inputs and outputs and RS485 and Ethernet communication interfaces  that  meets  the  requirements  for use  in  industrial  environments  

DigiRail NXprog is an Arduino IDE programmable device that has analog and digital inputs and outputs and RS485 and Ethernet communication interfaces  that  meets  the  requirements  for use  in  industrial  environments  

Plugs inline with a DIN 43650 connector, 4 to 20 mA powered pressure transducer to display the current pressure.

Five digit universal process indicator accepts thermocouples, Pt100, 4 to 20 mA, 50 mV and 10 V signals. 4-20mA Analog Retransmission. 240 VAC Powered. Mini USB interface.

Five digit universal process indicator accepts thermocouples, Pt100, 4 to 20 mA, 50 mV and 10 V signals. Has 4-20mA Analog Retransmission. 24 VDC/AC Powered. Mini USB interface