Novus

230 VAC powered weekly timer with 8 programs and 16 A SPDT relay

230 VAC powered weekly timer with 8 programs and 16 A SPDT relay. DIN-rail mount.

NOT AVAILABLE FOR BACKORDER

N1040i-RA Process indicator accepts thermocouple, Pt100, and linear current or voltage signals. Display range is configurable. 1 alarm relay output and 4 to 20 mA analog retransmission. 240 VAC powered.

N1040i-RE Process indicator accepts thermocouple, Pt100, and linear current or voltage signals. Display range is configurable. Auxiliary 24 VDC and 1 alarm relay outputs. RS-485 communications. 240 VAC powered.

100 mm probe Pt100 RTD sensor with standard head and non-isolated 4 to 20 mA transmitter.

100 mm probe Pt100 RTD sensor with standard head and isolated 4 to 20 mA transmitter.

200 mm Pt100 sensor head with a pre-configured non isolated 4 to 20 mA signal conditioner.

200 mm probe RTD Pt100 sensor with standard head and isolated 4 to 20 mA transmitter.

300 mm probe Pt100 RTD sensor with standard head and non-isolated 4 to 20 mA transmitter.

300 mm probe Pt100 RTD sensor with standard head and isolated 4 to 20 mA transmitter.

Datalogger with two universal analog input channels that can store ~64k readings. IP65 when installed. Data is downloaded with an infrared wand to a computer.

304 Stainless Steel Flange 1/2" NPT thread

N1040i Process indicator accepts thermocouple, Pt100, and linear current or voltage signals. Display range is configurable. 24 VDC powered.

Small, high-quality, WLAN 2.4 GHz antenna (male RPSMA connector)

Magnetic base with 2.5 m cable for WLAN Antenna. Suitable for use with the Novus AirGate.

Panel mount thermostat for Pt100 sensors. Configurable for a huge range of heating and cooling applications. 12 to 30 V, AC/DC powered.

Panel mount thermostat for J, K or T type thermocouple sensors. Configurable for a huge range of heating and cooling applications. 12 to 30 V, AC/DC powered with Modbus RS-485 interface.

CET-0032 REPLACES CET-0031. CET-0032 HAS RS485.

N1020 micro-size auto-adaptive PID temperature controller with universal input, mini USB interface and RS-485 interface with Modbus RTU protocol. 

Panel mount thermostat with included NTC sensor on 2 m lead. Configurable for a huge range of heating and cooling applications. 12 to 30V AC/DC powered. RS-485 interface with RTU Modbus protocol.

CET-004 is replaced with CET-0041 which has RS485

N1040i-RR Process indicator accepts thermocouple, Pt100, and linear current or voltage signals. Display range is configurable. 2 alarm outputs. 240 VAC powered.

Five digit universal process indicator accepts thermocouples, Pt100, 4 to 20 mA, 50 mV and 10 V signals. 240 VAC Powered. Mini USB interface

Designed specifically for flow applications, the N1500-FT Flow Rate & Totalization Panel Meter displays both instantaneous and totalized measurements. A single model can accept either a 4–20 mA input or a pulse signal, with the input type selected entirely through software. The meter offers multiple display modes and can be configured with up to four relays and digital communication. It also includes two isolated retransmission outputs: a 4–20 mA output typically used for instantaneous flow and an NPN pulse output commonly used for totalized flow.

Designed specifically for flow applications, the N1500-FT Flow Rate & Totalization Panel Meter displays both instantaneous and totalized measurements. A single model can accept either a 4–20 mA input or a pulse signal, with the input type selected entirely through software. The meter offers multiple display modes and can be configured with up to four relays and digital communication. It also includes two isolated retransmission outputs: a 4–20 mA output typically used for instantaneous flow and an NPN pulse output commonly used for totalized flow.

50 mm probe Pt100 RTD sensor with standard head. 3 wire connection and room in the head for a signal conditioner.