Novus

With a 1-metre cable terminated in an RP-SMA male connector, the NOC-350 connects directly to the NOVUS CG-WiFi ClickNGo module (NOC-342), making it the ideal external WiFi antenna upgrade for NOVUS-based automation systems.

The RHT-WM transmitters feature highly precise and stable sensors for measuring relative humidity and temperature. These measurements are converted into 4 to 20 mA output signals, which are linearly proportional to the readings.

Robust USB converter for four-wire (full duplex) RS-422 and RS-485 or two-wire (half duplex) industrial serial busses. 1.5 kVDC isolation between PC and serial bus. Best-of-class drivers.

Five digit universal process indicator accepts thermocouples, Pt100, 4 to 20 mA, 50 mV and 10 V signals. 240 VAC Powered. Mini USB interface

Five digit universal process indicator accepts thermocouples, Pt100, 4 to 20 mA, 50 mV and 10 V signals. 24 VDC/AC Powered. Mini USB interface

Five digit universal process indicator accepts thermocouples, Pt100, 4 to 20 mA, 50 mV and 10 V signals. 4-20mA Analog Retransmission. 240 VAC Powered. Mini USB interface.

Five digit universal process indicator accepts thermocouples, Pt100, 4 to 20 mA, 50 mV and 10 V signals. Has 4-20mA Analog Retransmission. 24 VDC/AC Powered. Mini USB interface

Five digit universal process indicator accepts thermocouples, Pt100, 4 to 20 mA, 50 mV and 10 V signals. 4-20mA Analog ,RS485, 2 Relays and 24VDC/AC Powered. Mini USB interface.

Wall mount, five digit universal process indicator accepts Load cells, thermocouples, Pt100, 4 to 20 mA, 50 mV and 5 V signals. Analog retransmission and RS-485. 100 to 240 VAC Powered.

Five digit universal process indicator accepts thermocouples, Pt100, 4 to 20 mA, 50 mV and 10 V signals. 100 to 240 VAC Powered.

Five digit universal process indicator accepts thermocouples, Pt100, 4 to 20 mA, 50 mV and 10 V signals. Analog retransmission, 4 Relays and RS-485. 24 VDC Powered.

Five digit universal process indicator accepts thermocouples, Pt100, 4 to 20 mA, 50 mV and 10 V signals. 24 VDC Powered.

N1040i-RE Process indicator accepts thermocouple, Pt100, and linear current or voltage signals. Display range is configurable. Auxiliary 24 VDC and 1 alarm relay outputs. RS-485 communications. 240 VAC powered.

N1040i-RA Process indicator accepts thermocouple, Pt100, and linear current or voltage signals. Display range is configurable. 1 alarm relay output and 4 to 20 mA analog retransmission. 12 to 24VDC powered.

N1040i-RA Process indicator accepts thermocouple, Pt100, and linear current or voltage signals. Display range is configurable. 1 alarm relay output and 4 to 20 mA analog retransmission. 240 VAC powered.

N1040i Process indicator accepts thermocouple, Pt100, and linear current or voltage signals. Display range is configurable. 24 VDC powered.

DIN rail mount signal conditioner takes thermocouples, Pt100 sensors or 0 to 50 mV in and outputs 4 to 20 mA and 0 to 10VDC. Programmable zero and span. 10 to 30 Vdc powered. 

The TxMini-M12 is a 4-20mA transmitter for Pt100 or Pt1000 sensors. It's ideal to be used in places with space restrictions. DIN-43650 connector.

Fully isolated DIN rail mount signal conditioner takes thermocouples, Pt100 sensors, 0 to 50 mV or 0 to 10 V in and outputs 4 to 20 mA. Programmable zero and span. Loop powered.

Fully isolated DIN rail mount signal conditioner takes thermocouples, Pt100 sensors, 0 to 50 mV, 0 to 20 mA or 4 to 20 mA in and outputs 0 to 10 V. Programmable zero and span.

TxIsoloop-2 Dual Loop Isolator

TxIsoloop-1 Single Loop Isolator

USB programming cable for Novus TxMini-M12 signal conditioners.

The TxConfig USB is the configuration interface to configure the whole NOVUS Smart Transmitters family such as TxRail, TxIsoRail, RHT sensors